Goodman ad9t961005cn 96 Afue 100000 Btu/h Downflow Gas Furnace

Product Description

The GOODMAN ad9t961005cn is a 96 AFUE, two-stage, downflow/horizontal gas furnace designed for ducted residential and light-commercial HVAC systems. It delivers 100,000 BTU/h input capacity at high fire with a rated output of 96,000 BTU/h, and steps down to 70,000 BTU/h input at low fire for efficient part-load operation. The unit runs on a multi-speed ECM blower motor rated at 1 hp, drawing a minimum of 14.3 amps on a 115-volt, single-phase, 60 Hz circuit with a maximum overcurrent protection of 25 amps. This furnace is ENERGY STAR certified and ANSI certified, making it appropriate for installations where energy-code compliance is required. A licensed HVAC technician handles installation and startup.

The ad9t961005cn is configured for downflow or horizontal installation in ducted forced-air systems. At 21 inches wide, it fits standard downflow platform or closet applications sized for 5-ton cooling capacity. The unit is suited for residential new construction and replacement projects where a high-efficiency, non-NOx, two-stage gas furnace is specified. High-fire airflow reaches 1,736 cubic feet per minute; low-fire airflow is rated at 1,248 cubic feet per minute. Temperature rise range is 35 to 65 degrees F at high fire and 30 to 60 degrees F at low fire.

Key Features

• 96 AFUE two-stage operation reduces short-cycling and improves comfort at part-load conditions
• Multi-speed ECM blower motor at 1 hp provides efficient airflow across both heating stages
• Downflow/horizontal installation configuration supports platform, closet, and attic horizontal applications
• Non-NOx burner design meets low-emissions requirements in applicable jurisdictions
• ENERGY STAR certified and ANSI certified for energy-code and safety compliance
• 21-inch cabinet width accommodates standard 5-ton downflow platform dimensions

Compatibility

Designed as an OEM downflow/horizontal gas furnace in the AD9T96 series, rated for up to 5-ton cooling coil applications in ducted forced-air systems.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with the National Fuel Gas Code (NFPA 54/ANSI Z223.1), local mechanical codes, and the manufacturer installation instructions. Shut off gas supply and disconnect electrical power before servicing or connecting any components. Verify vent material, vent sizing, and combustion air provisions meet code requirements for a 96 AFUE two-stage furnace before startup. Do not operate the unit without verifying proper static pressure, gas supply pressure, and temperature rise are within the published ranges.

Technical Specifications

• AFUE: 96%
• High-Fire Input Capacity: 100,000 BTU/h
• High-Fire Output Capacity: 96,000 BTU/h
• Low-Fire Input Capacity: 70,000 BTU/h
• Low-Fire Output Capacity: 67,200 BTU/h
• Cooling Capacity (Nominal): 60,000 BTU/h (5 Ton)
• Power Voltage: 115 volts, 1-phase, 60 Hz
• Minimum Circuit Amps: 14.3 amps
• Max Overcurrent Protection: 25 amps
• Blower Motor Horsepower: 1 hp
• Motor Speed Type: Multi-Speed ECM
• Gas Valve Type: Two Stage
• Air Flow Rate High Fire: 1,736 ft3/min
• Air Flow Rate Low Fire: 1,248 ft3/min
• Temperature Rise Range High Fire: 35 to 65 degrees F
• Temperature Rise Range Low Fire: 30 to 60 degrees F
• Installation Configuration: Downflow/Horizontal
• Unit Width: 21 inches
• Unit Height: 34.5 inches
• Unit Depth: 28.875 inches
• Blower Diameter: 11 inches
• Blower Width: 10 inches
• Unit Weight: 140 pounds
• Burner Type: Non-NOx
• Heat Exchanger Type: Gas
• Current Type: AC
• ENERGY STAR Certified: Yes
• ANSI Certified: Yes
• Standard Residential Parts Warranty: All Parts 5 Years; Heat Exchanger 20 Years
• Registered Residential Parts Warranty: All Parts 10 Years; Heat Exchanger 20 Years

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: ad9t961005cn