Goodman ad9s961005cn 96 Afue Gas Furnace 100000 Btu/h

Product Description

The Goodman ad9s961005cn is a 96 AFUE single-stage, multi-speed ECM gas furnace rated at 100,000 BTU/h high-fire input and 95,000 BTU/h output. Configured for downflow and horizontal installation, it is designed for ducted residential and light-commercial applications where high-efficiency heating and flexible airflow are required. Operating on 115 volts AC at 60 Hz, single phase, the unit delivers up to 1,720 CFM at high-speed heating and carries ANSI certification. Licensed HVAC technicians perform installation and startup on this class of equipment.

This furnace is suited for downflow or horizontal ducted systems in applications requiring up to 5-ton cooling coil compatibility. The 21-inch cabinet width fits standard platform or closet installations. The non-NOx burner configuration makes it appropriate for markets with low-NOx combustion requirements. The multi-speed ECM blower motor supports variable airflow staging across heating, cooling, and continuous-fan modes, which benefits both comfort and duct static management in larger residential systems.

Key Features

• 96 AFUE rated — 100,000 BTU/h input, 95,000 BTU/h output
• Single-stage gas valve with multi-speed ECM blower motor
• Downflow and horizontal installation configurations supported
• Non-NOx burner — suitable for low-NOx regulated markets
• High-fire heating airflow of 1,720 CFM
• ANSI certified; 5-ton nominal cooling coil capacity
• Temperature rise range at high fire: 40 to 70 degrees F

Compatibility

Designed for ducted downflow and horizontal installations; compatible with up to 5-ton nominal cooling coil configurations. Verify cabinet width clearance and duct transitions for 21-inch platform applications before installation.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, the National Fuel Gas Code (NFPA 54 / ANSI Z223.1), and the manufacturer installation instructions. Shut off gas supply and disconnect electrical power at the service disconnect before any service work. Minimum circuit ampacity is 16.7 A with maximum overcurrent protection of 25 A — verify wiring and breaker sizing against the unit nameplate and local electrical code. Do not exceed the rated 25 A overcurrent protection device.

Technical Specifications

• AFUE: 96%
• High-Fire Input Capacity: 100,000 BTU/h
• High-Fire Output Capacity: 95,000 BTU/h
• Gas Valve Type: Single Stage
• Motor Speed Type: Multi-Speed ECM
• Nominal Cooling Capacity: 60,000 BTU/h (5 ton)
• Heating Airflow (High): 1,720 CFM
• Power Voltage: 115 volts AC
• Power Phase: 1 Ph
• Power Frequency: 60 Hz
• Minimum Circuit Amps: 16.7 A
• Max Overcurrent Protection: 25 A
• Temperature Rise Range (High Fire): 40 to 70 degrees F
• Installation Configuration: Downflow / Horizontal
• Unit Width: 21 inches
• Unit Height: 34.5 inches
• Unit Depth: 28.875 inches
• Blower Diameter: 11 inches
• Blower Width: 10 inches
• Unit Weight: 144 pounds
• Blower Motor Horsepower: 1 hp
• Heat Exchanger Type: Gas
• Burner Type: Non-NOx
• Current Type: AC
• Unit Type: Indoor Ducted
• ANSI Certified: Yes
• Residential Parts Warranty (Registered): All Parts 10 Years; Heat Exchanger 79 Years
• Residential Parts Warranty (Standard): All Parts 5 Years; Heat Exchanger 20 Years
• Commercial Parts Warranty: All Parts 5 Years; Heat Exchanger 20 Years

Standard Information

• Brand: Goodman
• Manufacturer Part Number: ad9s961005cn