Goodman ad9s960603bn Gas Furnace 60000 Btu/h 96 Afue

Product Description

The GOODMAN ad9s960603bn is a 96 AFUE single-stage, multi-speed ECM gas furnace rated at 60,000 BTU/h input capacity. It is designed for downflow and horizontal installation in ducted indoor systems. The furnace operates on a single-phase 115-volt AC supply and delivers up to 1,149 cubic feet per minute of airflow at high-fire heating mode. A licensed HVAC technician installs this unit as the primary heating appliance in residential or light commercial ducted forced-air systems. The 96 AFUE rating means 96 percent of fuel input is converted to usable heat, making it a high-efficiency option for climate-controlled spaces requiring up to 3-ton nominal cooling coil pairing.

This furnace is suited for downflow or horizontal duct configurations in residential and multi-family applications. The 17.5-inch cabinet width fits standard platform or alcove installations where a downflow orientation is required. The multi-speed ECM blower motor allows staged airflow delivery for improved comfort and system efficiency. Non-NOx burner design makes it appropriate for installation in low-NOx compliance regions. The unit is produced in the United States and carries ANSI certification.

Key Features

• 96 AFUE efficiency rating for high-efficiency gas heating
• Single-stage gas valve with multi-speed ECM blower motor for variable airflow
• 60,000 BTU/h high-fire input with 57,660 BTU/h output capacity
• Downflow and horizontal installation configurations supported
• Non-NOx burner design for low-NOx compliance regions
• ANSI certified and produced in the United States
• 17.5-inch cabinet width compatible with 3-ton nominal cooling coil applications

Compatibility

Designed for ducted downflow and horizontal forced-air system installations requiring a 17.5-inch wide cabinet with 3-ton nominal cooling capacity pairing and 60,000 BTU/h heat input. Compatible cooling coil and air handler selections should be verified against manufacturer matchup documentation for the ad9s960603bn.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, the International Fuel Gas Code, and the manufacturer installation instructions. Shut off gas supply and disconnect electrical power before beginning any service or installation work. The unit requires a dedicated 115-volt circuit with a maximum overcurrent protection of 15 amps and a minimum circuit ampacity of 10.1 amps. Verify flue venting configuration, gas line sizing, and duct static pressure against design specifications before startup.

Technical Specifications

• AFUE: 96
• High-Fire Input Capacity: 60,000 BTU/h
• High-Fire Output Capacity: 57,660 BTU/h
• Nominal Cooling Capacity: 36,000 BTU/h (3 Ton)
• Gas Valve Type: Single Stage
• Motor Speed Type: Multi-Speed ECM
• Blower Motor Horsepower: 0.5 hp
• Blower Diameter: 11 inches
• Blower Width: 8 inches
• Air Flow Rate High Heating: 1,149 ft3/min
• Temperature Rise Range High Fire: 35-65 degrees F
• Power Voltage: 115 volts AC
• Power Phase: Single Phase
• Power Frequency: 60 Hz
• Minimum Circuit Amps: 10.1 amps
• Max Overcurrent Protection: 15 amps
• Installation Configuration: Downflow/Horizontal
• Unit Width: 17.5 inches
• Unit Height: 34.5 inches
• Unit Depth: 28.875 inches
• Weight: 116 pounds
• Burner Type: Non-NOx
• Heat Exchanger Type: Gas
• Current Type: AC
• Unit Type: Indoor Ducted
• ANSI Certified: Yes
• Country of Origin: United States
• Standard Parts Warranty (Residential): All Parts 5 Years; Heat Exchanger 20 Years
• Registered Parts Warranty (Residential): All Parts 10 Years; Heat Exchanger 20 Years
• Registered Unit Replacement Warranty (Residential): Heat Exchanger 10 Years Unit Replacement

Standard Information

• Brand: GOODMAN
• Manufacturer Part Number: ad9s960603bn