Glasfloss 18X24X2PL40 Pleated Air Filter 18x24x2 Merv 10

Product Description

The GLASFLOSS 18X24X2PL40 is a 2-inch pleated air filter from the Z-Line Series, designed for standard-capacity HVAC filtration in residential and light commercial applications. Measuring 18 x 24 x 2 inches and rated MERV 10 per the ANSI/ASHRAE 52.2 test standard, this filter captures a broad range of airborne particulates without restricting airflow in most forced-air systems. The filter media uses synthetic fibers that do not absorb moisture and will not support microbial growth, making it a reliable choice in humid climates or high-use systems. Licensed HVAC technicians and facilities maintenance personnel typically install and replace these filters during routine preventive maintenance visits.

The Z-Line Series PL40 filter is suited for virtually every standard forced-air application, including residential gas furnaces, heat pumps, air handlers, and packaged HVAC units that accept a 2-inch filter. The non-moisture-absorbing fiber construction is especially practical in applications where filter media degradation from humidity has been a recurring issue. This filter fits any system requiring an 18 x 24 x 2 inch slot and is part of the Glasfloss Z-Line lineup, which includes SB, ZL, HV, and MR-11 variants covering MERV 10 and MERV 11 performance levels.

Key Features

• MERV 10 rating per ANSI/ASHRAE 52.2 test standard for verified filtration performance
• Synthetic fiber media does not absorb moisture and will not support microbial growth
• Standard 18 x 24 x 2 inch nominal size fits a wide range of residential and commercial HVAC equipment
• Part of the Z-Line Series, engineered for improved performance across virtually every application
• Lightweight at 0.5 pounds, simplifying handling and bulk changeout during service calls

Compatibility

Designed as an OEM-style replacement pleated filter for residential and light commercial forced-air HVAC systems requiring an 18 x 24 x 2 inch filter. Compatible with any system accepting a standard 2-inch pleated filter in that nominal size.

Installation Notes

Air filters at this size and depth are typically replaced by HVAC technicians or qualified maintenance personnel following local codes and equipment manufacturer guidelines. Before replacing the filter, shut down the air handler or furnace at the system disconnect or thermostat to prevent unfiltered air from bypassing the slot during changeover. Verify airflow direction markings on the filter frame and install so the directional arrow points toward the blower. Dispose of used filters in accordance with facility or local waste guidelines.

Technical Specifications

• Nominal Size: 18 x 24 x 2 inches
• Depth: 2 inches
• Width: 18 inches
• Height: 24 inches
• Weight: 0.5 pounds
• MERV Rating: MERV 10
• Test Standard: ANSI/ASHRAE 52.2
• Series: Z-Line
• Filter Type: Pleated

Standard Information

• Brand: GLASFLOSS
• Manufacturer Part Number: 18X24X2PL40