Gibraltar SS-BSW-2L-G Studded Leveling Mount 1/2-13

Product Description

The GIBRALTAR SS-BSW-2L-G is a studded leveling mount designed for industrial and commercial equipment positioning applications. It features a 1/2-13 threaded stud and a stainless steel pad and stud construction, providing corrosion resistance in demanding environments. The mount supports a load capacity of 120 pounds (55 kg) and an overall length of 3-3/4 inches, making it suitable for equipment leveling tasks where precision adjustment and durability are required. Maintenance technicians and millwrights typically install these mounts when setting machinery, workbenches, or fabricated frames on uneven surfaces.

This leveling mount is used in light industrial, manufacturing, and mechanical equipment applications where a stud-style mount is needed to level and stabilize equipment. The stainless steel construction makes it appropriate for environments with moisture exposure or washdown conditions. With a 1-7/8 inch base diameter and a 2-inch stud length, it fits standard leveling configurations on frames and base plates. It is packaged individually and sold in single-unit quantities.

Key Features

• 120 lb load capacity with corrosion-resistant stainless steel stud and pad
• 1/2-13 thread size for compatibility with standard threaded inserts and nuts
• 1-7/8 inch base diameter provides stable ground contact
• 2-inch stud length with 3-3/4 inch overall length for adequate height adjustment range
• 3/4 inch hex size allows installation and adjustment with a standard wrench
• Stainless steel materials suited for wet or corrosive service environments

Compatibility

Designed as an OEM-style replacement or direct-fit leveling mount for equipment frames and base plates requiring a 1/2-13 threaded stud leveling foot with a stainless steel pad.

Installation Notes

Leveling mounts of this type are installed by millwrights, maintenance technicians, or fabricators during equipment setup or relocation. Power down and de-energize any connected equipment before adjusting or replacing leveling feet. Use a 3/4 inch wrench on the hex to thread the stud into the equipment base plate and lock the position with a jam nut if required. Verify load distribution across all mounting points to avoid overloading any single foot beyond its rated capacity.