Gibraltar SP20372 Fixed Shoulder Eye Bolt 6000 Lb 3/4-10

Product Description

The GIBRALTAR SP20372 is a fixed shoulder lifting eye bolt designed for rigging and load-lifting applications in industrial, mechanical, and construction environments. It is manufactured from Grade C-1035 steel with a zinc-plated finish for corrosion resistance. The bolt carries a rated lifting capacity of 6,000 pounds and features a 3/4-10 thread size with a fully threaded shank measuring 3 inches in length. The shoulder design provides a critical load-bearing contact surface against the fixture, which is required for angular load applications. Riggers, millwrights, and maintenance mechanics are the primary installers of this hardware.

This eye bolt is suited for vertical and angled lifts where a shouldered eye bolt is specified per rigging standards. The 3-inch shank and 3-inch thread length allow installation into moderately deep tapped holes or through structural members using a nut. The 1-1/2-inch inside eye diameter accommodates standard shackles, hooks, and wire rope hardware. It is commonly used in equipment rigging, material handling, and machinery installation across manufacturing, HVAC equipment setting, and general industrial maintenance.

Key Features

• 6,000 lb rated lifting capacity for heavy-duty rigging use
• Shouldered design provides load-bearing contact surface required for angular loading
• Fully threaded 3-inch shank allows flexible installation depth
• 1-1/2-inch inside eye diameter fits standard hooks, shackles, and wire rope hardware
• Zinc-plated finish provides corrosion resistance for general-purpose environments
• Grade C-1035 steel construction for predictable mechanical strength

Compatibility

Designed as a standard shoulder-type lifting eye bolt for use in tapped holes or through-bolted assemblies where a 3/4-10 thread and 3-inch shank length are specified.

Installation Notes

Installation should be performed by a qualified rigger or maintenance mechanic following applicable ASME B30.26 rigging hardware standards. The shoulder must seat fully and squarely against the mounting surface before applying any load. Never apply a load to the eye bolt before the shoulder is completely flush and tight. For angular lifts, always verify the rated capacity reduction factor for the specific lift angle and use a swivel eye bolt or shackle arrangement if required by the rigging plan.