Gibraltar PSS12341GB Fixed Lifting Eye Bolt 2150 Lb 1/2-13

Product Description

The GIBRALTAR PSS12341GB is a fixed lifting eye bolt designed for overhead lifting and rigging applications where a secure, corrosion-resistant attachment point is required. Rated at 2,150 pounds lifting capacity, it features a 1/2-13 UNC thread with a 2-inch threaded length on a 4.5-inch shank. The eye is forged from Grade 304 stainless steel, making it well suited for wet, marine, or chemically active environments where carbon steel would corrode. The partial threading design provides a smooth shank section for structural clearance applications. Rigging professionals and industrial maintenance crews are the primary installers of this hardware.

This eye bolt is used in overhead lifting, tie-down, and load-securing setups across industrial, marine, and commercial construction environments. The without-shoulder design means the bolt passes through a clearance hole and is secured with a nut on the back side. It is appropriate for in-line vertical loads applied along the axis of the bolt. Use in residential, commercial, or marine structures where a Grade 304 stainless steel fastener is specified for corrosion resistance and load capacity requirements.

Key Features

• 2,150 lb rated lifting capacity for overhead rigging applications
• Grade 304 stainless steel construction resists corrosion in wet and marine environments
• 1/2-13 UNC thread size with 2-inch thread length for standard nut engagement
• 4.5-inch shank length accommodates thicker structural members
• Partially threaded shank provides smooth section through the mounting substrate
• Without-shoulder design for through-hole installation with nut retention

Compatibility

Designed as an OEM-style fixed lifting eye bolt for use with standard 1/2-13 UNC nuts and hardware in overhead lifting and rigging assemblies.

Installation Notes

Installation should be performed by a qualified rigger or millwright familiar with ASME B30.26 rigging hardware standards. Power down or de-energize any adjacent equipment before installing overhead hardware. The eye bolt must be fully seated and torqued against the mounting surface with an appropriately rated nut before applying any load. Never apply side loads or angular loads to a fixed eye bolt without a shouldered design rated for that application.