Gibraltar MEP1064-G Straight Ejector Pin 8.2mm 250mm Steel

Product Description

The GIBRALTAR MEP1064-G is a straight ejector pin designed for use in injection mold tooling and die casting applications. It features an 8.2 mm pin diameter and a 250 mm overall length, with a 14 mm head diameter and a 5 mm head height that seats securely against the ejector plate. The pin is manufactured from steel with a nitride finish, which provides surface hardness and wear resistance during high-cycle mold operation. Toolmakers, moldmakers, and mold maintenance technicians install and replace these pins as part of routine mold maintenance or when refitting ejection systems.

This ejector pin is suited for use in injection molding and die casting mold bases requiring a straight-style pin configuration. The 8.2 mm diameter and 245 mm pin length make it appropriate for medium-bore ejection applications in both prototype and production molds. It is typically installed in the ejector plate assembly of a two-plate or three-plate injection mold. The nitride surface treatment helps resist galling and extends service life in abrasive or high-temperature mold environments.

Key Features

• Straight ejector pin style for standard ejector plate installation
• 8.2 mm pin diameter with 245 mm pin length for medium-bore ejection
• 14 mm head diameter and 5 mm head height for positive plate retention
• Steel construction with nitride finish for surface hardness and wear resistance
• 250 mm overall length suits a wide range of mold base depths

Compatibility

Designed as a direct-replacement straight ejector pin for injection mold and die casting tooling applications requiring an 8.2 mm diameter pin with a 250 mm overall length and standard 14 mm head geometry.

Installation Notes

Installation is performed by qualified moldmakers or toolroom technicians. The mold must be fully de-energized, cooled, and removed from the press before ejector pin replacement. Pins should be checked for straightness and proper fit in the ejector bore before installation to avoid galling or binding during cycling. Follow applicable shop safety procedures and manufacturer mold specifications when servicing ejection systems.