Gibraltar LEP2151-G Straight Ejector Pin 0.75 in Steel

Product Description

The GIBRALTAR LEP2151-G is a straight ejector pin designed for use in injection mold tooling and die casting applications. Machined from steel with a nitride finish, this pin provides the wear resistance and dimensional stability required in high-cycle mold environments. It measures 0.75 inches in pin diameter and 12 inches in overall length, with a pin length of 11.75 inches. The 1-inch head diameter and 0.25-inch head height seat the pin securely in standard ejector plates. Installation and replacement are typically handled by toolmakers and mold technicians working in production or maintenance settings.

This ejector pin suits residential and industrial mold bases where a straight ejector configuration is required. The nitride surface treatment reduces galling and extends service life under repetitive ejection cycles. At a weight of 6 pounds, the pin is dimensionally substantial and suited for heavier mold assemblies. Tooling engineers and mold maintenance technicians select this pin for standard ejector plate setups requiring a 0.75-inch diameter straight pin at 12 inches overall length.

Key Features

• Straight ejector pin configuration for standard mold ejector plate systems
• 0.75-inch pin diameter with 11.75-inch usable pin length
• 1-inch head diameter and 0.25-inch head height for positive plate retention
• Steel construction with nitride finish for enhanced surface hardness and wear resistance
• 12-inch overall length accommodates deeper mold stack heights

Compatibility

Designed as a direct-fit straight ejector pin for injection mold tooling and die casting mold bases requiring a 0.75-inch diameter straight ejector pin at 12 inches overall length.

Installation Notes

Installation is performed by qualified toolmakers or mold technicians. The mold must be fully de-energized, cooled, and secured before ejector pin replacement. Ejector pins should be inspected for straightness and surface condition before installation to avoid binding in the guide bore. Follow applicable shop safety procedures and mold maintenance protocols when working inside press tooling.