Gibraltar HCP5775 Hard Core Pin 19/64 in 14 in Steel

Product Description

The GIBRALTAR HCP5775 is a steel hard core pin used for alignment, retention, and fastening applications in industrial and mechanical assemblies. The pin measures 0.2969 inches (19/64 inches) in pin diameter and 14 inches in overall length, with a head diameter of 0.5 inches (1/2 inch) and a head height of 0.25 inches (1/4 inch). Constructed from steel, it delivers the durability and dimensional consistency required for repetitive-use and load-bearing installations. Machinists, maintenance technicians, and assembly professionals use this type of pin where precise fit and reliable holding force are essential.

Hard core pins of this type are suited for use in jigs, fixtures, tooling setups, and mechanical assemblies where a headed drive pin is required. The 14-inch overall length accommodates deeper insertion scenarios or applications requiring extended reach through stacked components or thick workpieces. The steel construction makes it appropriate for both shop-floor fabrication environments and field maintenance settings where metal-to-metal engagement is standard.

Key Features

• Pin diameter of 0.2969 inches (19/64 inches) for precision fit in matching bores
• 14-inch overall length suitable for deep-reach or multi-layer assembly applications
• Head diameter of 0.5 inches (1/2 inch) with a 0.25-inch (1/4-inch) head height for positive seating and drive surface
• Steel construction provides strength and durability for repetitive industrial use
• Lightweight at 0.1 pounds for easy handling during installation

Compatibility

Designed as a standard hard core drive pin for use in industrial jigs, fixtures, and mechanical assemblies requiring a 19/64-inch diameter headed pin with a 14-inch overall length.

Installation Notes

Installation is typically performed by machinists or maintenance technicians using a hammer or arbor press. Ensure the receiving bore is clean, properly sized, and free of burrs before driving the pin to avoid galling or misalignment. Always wear appropriate eye protection when driving steel pins. Inspect the pin for deformation after installation to confirm proper seating.