Gibraltar CP4266-G Soft Core Pin 9/32 in 6 in Oal Steel

Product Description

The GIBRALTAR CP4266-G is a soft core pin used in assembly, fixturing, and tooling applications where a compressible or easily driven locating pin is required. Machined from steel with a soft hardness rating, this pin measures 9/32 inch in diameter and 6 inches in overall length, with a usable pin length of 5-3/4 inches. The headed design provides a positive stop during installation and simplifies removal. At 0.13 pounds, it is lightweight and suited for high-volume tooling environments. Machinists, tool-and-die technicians, and industrial assembly technicians are the primary installers.

Soft core pins are commonly used in jigs, fixtures, dies, and production tooling where a locating or alignment pin must be installed and removed repeatedly without damaging the mating component or bore. The soft core construction allows the pin to compress or deform slightly under load, making it suitable for applications where a standard hardened pin would cause galling or bore damage. This pin is appropriate for light-duty fixturing in both shop and production floor environments.

Key Features

• Soft hardness rating allows installation without damaging delicate bores or mating surfaces
• 9/32 inch pin diameter with 5-3/4 inch usable pin length
• 7/16 inch head diameter provides a positive seating stop
• 1/4 inch head height keeps the profile low in flush or near-flush mounting applications
• Steel construction for durability in shop and production environments
• Lightweight at 0.13 pounds, suitable for repetitive handling in high-cycle tooling

Compatibility

Designed as a standard soft core locating pin for use in jigs, fixtures, dies, and general industrial tooling where a 9/32 inch diameter headed pin with soft hardness is specified.

Installation Notes

Installation is typically performed by machinists or tool-and-die technicians using standard hand tools or a soft mallet. Ensure the receiving bore is clean and free of burrs before driving the pin to avoid binding or premature deformation of the soft core. Remove the pin with an appropriate extraction tool rather than prying against the head to preserve both the pin and the tooling. Consult applicable workholding and fixturing standards for your industry when specifying locating pin hardness and fit tolerance.