Gibraltar CP4255-G Soft Core Pin 3/16 in Steel

Product Description

The GIBRALTAR CP4255-G is a soft core drive pin designed for use in manufacturing, assembly, and maintenance applications where a sacrificial or driftable pin is required. Measuring 3/16 inches in pin diameter and 10 inches in overall length, this pin is machined from steel with a soft hardness rating, allowing it to absorb impact and be driven out without damaging surrounding components. The 3/8-inch head diameter and 3/16-inch head height provide a positive seating surface during installation. Machinists, millwrights, and maintenance technicians are the primary installers of this type of pin.

Soft core pins are used in jigs, fixtures, and mechanical assemblies where a pin must be removed or replaced without distorting the bore. The soft hardness makes this pin suitable for applications where the pin itself is intended to yield under load or be driven free with standard tooling. This pin is sold individually and suits both production and repair environments.

Key Features

• Soft hardness steel construction allows the pin to be driven out without bore damage
• 3/16 inch pin diameter fits standard bore sizes requiring a close-tolerance soft pin
• 10 inch overall length with 9.812 inch usable pin length for deep-reach applications
• 3/8 inch head diameter provides a broad seating surface to prevent over-insertion
• Steel material offers adequate strength for general mechanical assembly use

Compatibility

Designed as a standard soft core pin for use in mechanical assemblies, jigs, and fixtures requiring a 3/16 inch diameter soft steel drive pin.

Installation Notes

Installation is typically performed by machinists or maintenance technicians using a mallet or press. Ensure the receiving bore is clean and free of debris before driving the pin. Never use hardened tooling that could mushroom the soft head or damage the bore. Verify pin diameter and length against application requirements before installation.