Gibraltar CP4253-G Soft Core Pin 3/16 in Steel

Product Description

The GIBRALTAR CP4253-G is a soft core pin used for alignment, locating, and fastening applications in tooling, fixtures, and mechanical assemblies. Made from steel with a soft hardness rating, this pin is designed to be driven or pressed into place without requiring hardened tooling. The pin measures 3/16 inches in diameter with an overall length of 3 inches and a usable pin length of 2.812 inches. The head measures 3/8 inches in diameter and 3/16 inches in height. Machinists, toolmakers, and maintenance technicians working on jigs, fixtures, and general fabrication applications commonly install this type of pin.

This soft core pin is suited for light-duty locating and assembly tasks in both production and maintenance environments. Its headed design allows it to seat flush against a mating surface while the pin body engages a drilled or reamed hole. Typical applications include fixture assembly, component alignment, and mechanical subassembly work where a replaceable or removable locating element is needed. The steel construction provides adequate strength for standard shop and fabrication use.

Key Features

• Soft core construction allows installation without hardened press tooling
• 3/16 inch pin diameter for precision locating in standard drilled or reamed holes
• 3/8 inch head diameter provides a positive seating surface
• 3 inch overall length with 2.812 inch usable pin length
• Steel material offers reliable strength for general fixture and assembly use

Compatibility

Designed as a standard soft core locating pin for use in tooling fixtures, jigs, and mechanical assemblies where a 3/16 inch diameter headed pin is required.

Installation Notes

Soft core pins are typically installed by toolmakers or maintenance technicians using a press or mallet. Ensure the receiving hole is clean and sized correctly before driving the pin to avoid deformation. No special certifications are required for installation, but proper personal protective equipment should be worn when pressing or driving pins. Inspect the hole and mating surface for burrs or damage before installation.