Gibraltar BSW-2A-G Studded Pivotal Leveling Mount 5000 Lb

Product Description

The GIBRALTAR BSW-2A-G is a studded pivotal leveling mount designed for industrial and commercial equipment support applications. The pivotal design allows the mount to self-align under load, compensating for minor floor irregularities and keeping equipment level without constant manual adjustment. Built with a steel pad and steel stud, this mount handles a rated static load capacity of 5,000 lb. At 5.125 inches in length and 1.875 inches in base diameter, it fits into tight equipment footprints while delivering heavy-duty support. Millwrights, maintenance technicians, and equipment installers are the typical trades working with leveling mounts of this type.

This leveling mount is suited for machinery, industrial equipment frames, fabricated steel bases, and production line components requiring precise, stable footing on concrete or steel floors. The 1/2-13 bolt thread size is a standard coarse-thread specification common across heavy industrial hardware. The mount is appropriate for both new equipment installations and retrofit leveling applications where floor surfaces are uneven or where vibration isolation and load distribution are priorities.

Key Features

• 5,000 lb static load capacity for heavy industrial equipment support
• Pivotal design self-aligns under load to compensate for floor irregularities
• Steel pad and steel stud construction for durability under continuous load
• 1/2-13 bolt thread size for compatibility with standard industrial hardware
• Compact 1.875 inch base diameter fits tight equipment footprints
• 5.125 inch overall length provides meaningful height adjustment range

Compatibility

Designed as an OEM-style leveling mount for industrial machinery, fabricated equipment bases, and production equipment frames requiring a 1/2-13 stud thread and up to 5,000 lb per-point load capacity.

Installation Notes

Installation is typically performed by millwrights or maintenance technicians during equipment setup or relocation. Ensure the mating tapped hole or nut accepts a 1/2-13 thread before installation. De-energize and lock out all power sources to the equipment before adjusting or replacing leveling mounts under load. Use a calibrated torque wrench and level to set final mount height evenly across all mount points.