Gibraltar BSNYLC3-TEL-G Pivotal Leveling Mount 5000 Lb

Product Description

The GIBRALTAR BSNYLC3-TEL-G is a tapped pivotal leveling mount designed for industrial and commercial equipment support applications. It features a 5/8-11 threaded stud machined from 303 stainless steel and a 3-inch diameter elastomer pad base that allows angular adjustment to compensate for uneven floors or mounting surfaces. The pivotal design lets the base self-level under load, maintaining stable contact across the pad footprint. With a rated load capacity of 5,000 pounds, this mount handles demanding static loads common in manufacturing, processing, and heavy equipment installations. Typical installers include millwrights, industrial mechanics, and equipment riggers.

This leveling mount is suited for use under machine bases, industrial enclosures, conveyors, workbenches, and similar equipment requiring precise leveling and vibration isolation on concrete or steel floors. The elastomer pad provides a non-marring, slip-resistant contact surface, making it appropriate for environments where floor protection or vibration damping is a priority. The stainless steel stud resists corrosion in wash-down or humid environments. The compact overall length of 1-5/8 inches suits applications with limited clearance under the equipment frame.

Key Features

• 5,000 lb static load capacity for heavy industrial equipment support
• Pivotal base design self-levels to accommodate uneven mounting surfaces
• 303 stainless steel stud for corrosion resistance in wet or humid environments
• Elastomer pad provides vibration damping and non-marring floor contact
• 3-inch base diameter distributes load across a stable footprint
• 5/8-11 tapped thread for straightforward integration with standard fastener systems

Compatibility

Designed as a direct-fit tapped pivotal leveling mount for industrial machinery, equipment frames, and enclosures requiring a 5/8-11 threaded mounting point and a 3-inch base diameter pad.

Installation Notes

Installation is typically performed by millwrights or industrial mechanics during equipment setting and alignment. De-energize and lock out all power sources to the equipment before adjusting or repositioning leveling mounts. Use a calibrated level to verify equipment alignment after tightening the stud into the frame tapped hole. Do not exceed the rated 5,000 lb load capacity, and ensure the mounting surface is clean and free of debris before seating the elastomer pad.