Genesis Cable 43021104 22AWG 6-conductor Fplr Fire Alarm Cable

Product Description

The GENESIS CABLE 43021104 is a 22 AWG, 6-conductor solid-conductor fire alarm cable rated FPLR (Fire Power Limited Riser) and jacketed for riser-rated installations. Sold in a 1,000-foot box with a red jacket, this cable is designed for use in fire detection and alarm signaling systems where a riser rating is required by code. The solid conductor construction supports reliable signal transmission across typical fire alarm wiring runs. Fire alarm technicians and licensed low-voltage contractors are the primary installers of this product.

This cable is used in commercial and residential fire alarm installations where the riser rating is required to meet local building and fire codes. Common applications include panel-to-detector wiring, initiating device circuits, and notification appliance circuits routed vertically between floors in riser shafts. The red jacket provides visual identification as required in many fire alarm installations, making it easy to distinguish from other low-voltage wiring in the building.

Key Features

• 22 AWG solid conductor construction for consistent signal performance
• 6-conductor configuration supports multi-zone or multi-circuit runs in a single cable
• FPLR riser rating meets requirements for vertical riser shaft routing
• Red jacket provides standard fire alarm cable identification
• 1,000-foot box format reduces handling and supports larger installation pulls

Compatibility

Designed as an FPLR-rated fire alarm cable suitable for use with listed fire alarm control panels and devices requiring 22 AWG solid-conductor wiring in riser-rated installations.

Installation Notes

Installation must be performed by a licensed fire alarm technician or low-voltage contractor in accordance with NFPA 72, NFPA 70 (NEC Article 760), and applicable local codes. De-energize the fire alarm panel and isolate affected circuits before making any wiring connections. FPLR-rated cable is approved for vertical riser runs but must not be substituted for FPLP (plenum) cable in plenum air-handling spaces. Verify conductor-to-conductor and conductor-to-ground continuity after pulling cable to confirm no damage occurred during installation.