General Electric nf96u110s5cr Gas Furnace 110K Btu 96% Afue

Product Description

The GENERAL ELECTRIC nf96u110s5cr is a single-stage residential gas furnace rated at 110,000 BTU/h input and 107,000 BTU/h output, delivering a 96% AFUE efficiency rating. It operates on 120 volts and uses an ignitor-based ignition system. A constant torque ECM-style motor manages airflow at up to 2,000 CFM, supporting consistent heat distribution across the system. The cabinet measures 33 inches tall, 21 inches wide, and 28.5 inches deep, finished in gray. This unit is designed for installation by licensed HVAC technicians in residential forced-air heating systems where high-efficiency gas heat is required.

The nf96u110s5cr is configured for upflow and horizontal airflow orientations, making it suitable for installations in utility closets, basements, attics, or crawlspace-adjacent mechanical rooms where horizontal runs are needed. Its C cabinet sizing fits standard residential platform configurations. The furnace supports both R410A and R454B refrigerant coil pairings when used as part of a split system. Low NOx emissions are rated below 40 Ng/J, meeting applicable air quality requirements in many regulated markets.

Key Features

• 96% AFUE rating for high-efficiency residential gas heating
• 110,000 BTU/h input with 107,000 BTU/h output
• Single-stage heating operation with constant torque motor
• Upflow and horizontal airflow configurations supported
• Low NOx emissions below 40 Ng/J
• Compatible with R410A and R454B refrigerant coil pairings
• 15-amp fuse protection on 120-volt power supply

Compatibility

Designed for use as a residential gas furnace in forced-air split systems; compatible with cooling coils using R410A or R454B refrigerant. Refer to the manufacturer installation guide for approved coil and air handler pairings.

Installation Notes

Installation must be performed by a licensed HVAC technician in accordance with local mechanical codes, the IFGC, and the manufacturer installation instructions. Shut off gas supply and disconnect electrical power at the breaker before beginning any installation or service work. Verify that flue venting, gas line sizing, and electrical supply all meet the specifications outlined in the installation manual before startup. Do not operate the unit without all panels secured and venting fully connected.

Technical Specifications

• Input Capacity: 110,000 BTU/h
• Output Capacity: 107,000 BTU/h
• AFUE: 96%
• Airflow Rate: 2,000 CFM
• Heating Stages: Single-Stage
• Voltage: 120 volts
• Fuse Rating: 15 amps
• Motor Type: Constant Torque
• Ignition Type: Ignitor
• Airflow Orientation: Upflow / Horizontal
• Refrigerant Compatibility: R410A / R454B
• Emissions Level: Low NOx (below 40 Ng/J)
• Color: Gray
• Overall Height: 33 inches
• Overall Width: 21 inches
• Overall Depth: 28.5 inches
• Net Weight: 148.5 pounds
• Shipping Weight: 158.5 pounds
• Parts Warranty: Limited 5-year entire appliance; limited 10-year entire appliance with registration; limited 20-year heat exchanger; limited lifetime heat exchanger with registration

Standard Information

• Brand: GENERAL ELECTRIC
• Manufacturer Part Number: nf96u110s5cr