Gator 9600 Masonry Cut-off Wheel 4x0.045x5/8 in Type 1

Product Description

The GATOR 9600 is a Type 1 thin-cut masonry cut-off wheel designed for use with standard angle grinders. It measures 4 inches in diameter, 0.045 inches thick, and features a 5/8-inch arbor bore. The fiberglass-reinforced construction keeps the wheel rigid under load and helps it resist shattering during aggressive cuts. At 0.059 pounds, it is a lightweight consumable suited for repetitive cutting tasks on masonry materials. Licensed tradespeople and experienced DIYers alike reach for this wheel when precise, clean cuts are needed on tile, block, brick, or similar masonry substrates.

This cut-off wheel is intended for use on angle grinders equipped with a 5/8-inch arbor. Its thin 0.045-inch kerf minimizes material loss and reduces drag during cuts. The Type 1 flat profile makes it appropriate for straight, plunge-style cuts on masonry surfaces. Typical applications include cutting concrete block, brick, mortar joints, and similar hard masonry materials in both residential and light commercial construction or renovation work.

Key Features

• Type 1 flat cut-off wheel profile for straight and plunge cuts
• Thin 0.045-inch kerf reduces drag and material waste
• Fiberglass-reinforced construction for rigidity and shatter resistance
• 4-inch diameter fits standard small angle grinders
• 5/8-inch arbor bore for broad grinder compatibility
• Lightweight at 0.059 pounds for reduced fatigue during repeated use

Compatibility

Designed for use with angle grinders equipped with a 5/8-inch arbor accepting 4-inch Type 1 cut-off wheels.

Installation Notes

Wheel installation and replacement should be performed by a qualified operator following the grinder manufacturer's instructions. Always power down and unplug or de-energize the angle grinder before mounting or removing a wheel. Inspect the wheel for cracks or chips before each use and never operate above the maximum RPM rating marked on the wheel. Wear appropriate PPE including a face shield, gloves, and hearing protection when cutting masonry.

Technical Specifications

• Wheel Type: Type 1 Flat
• Diameter: 4 inches
• Thickness: 0.045 inches
• Arbor Bore: 5/8 inches
• Construction: Fiberglass reinforced
• Weight: 0.059 pounds
• Application: Masonry

Standard Information

• Brand: GATOR
• Manufacturer Part Number: 9600