G E Lighting 98283 A19 Led Bulb 6W Daylight 4 Pack

Product Description

The G E LIGHTING 98283 is a 6-watt A19 LED light bulb designed as a direct replacement for standard 40-watt incandescent lamps. Sold in a pack of four, each bulb delivers 450 lumens at a 5000 Kelvin daylight color temperature, making it well suited for task lighting and general-purpose fixtures. The medium base (E26) fits the most common residential and light commercial sockets. With a rated life of 15,000 hours (approximately 13.7 years at average use), these bulbs reduce replacement frequency in hard-to-reach or high-use fixtures. ENERGY STAR approved and dimmable, the 98283 meets efficiency and control requirements for a wide range of lighting applications. Licensed electricians and general contractors routinely specify these for retrofit and new-construction lighting packages.

These A19 bulbs are appropriate for residential, light commercial, and retail environments where daylight-spectrum illumination is preferred. Typical install locations include overhead fixtures, table lamps, floor lamps, and recessed can adapters using medium-base sockets. The dimmable design requires a compatible LED dimmer switch for smooth dimming performance. The 5000 Kelvin daylight output and CRI of 80 make these a practical choice for workspaces, garages, utility rooms, and display areas where accurate color rendering and bright, cool light are priorities.

Key Features

• 6 watts replaces 40-watt incandescent — significant energy reduction with no fixture change
• 450 lumens output at 5000 Kelvin daylight color temperature
• Dimmable — compatible with standard LED-rated dimmer switches
• CRI of 80 for accurate color rendering in work and display environments
• 15,000-hour rated life at approximately 13.7 years average use
• ENERGY STAR approved
• Sold as a 4-pack in retail-ready boxed packaging

Compatibility

Designed as an OEM-style replacement for standard medium-base (E26) A19 incandescent or CFL fixtures rated for 40 watts or higher. Dimmable operation requires a compatible LED dimmer; verify dimmer compatibility before installation.

Installation Notes

Turn off the fixture and allow any existing bulb to cool fully before removal. Confirm the socket is a medium-base (E26) type and that the fixture wattage rating meets or exceeds the installed load. For dimmable applications, an electrician should verify the dimmer is rated for LED loads per NEC guidelines to avoid flickering or reduced bulb life. Do not install in fully enclosed, airtight fixtures unless the fixture is rated for that application.