G E Lighting 93129000 Led T4 G9 2.5W 3000K Bulb

Product Description

The G E LIGHTING 93129000 is a 2.5-watt LED T4 lamp designed for G9 base fixtures common in residential and light commercial lighting applications. Delivering 280 lumens at a color temperature of 3,000 Kelvin, this frosted bulb produces a warm white light output comparable to a 25-watt incandescent lamp. The T4 tubular shape and G9 bi-pin base make it a direct fit for sconce-style luminaires and other compact decorative fixtures. With a rated life of 15,000 hours (approximately 13.7 years at typical usage), this LED lamp significantly reduces replacement frequency compared to incandescent equivalents. It is non-dimmable and ships as a pack of 4 units.

This lamp is suited for residential sconces, vanity fixtures, and decorative pendant or accent luminaires that accept a G9 bi-pin base. The frosted finish diffuses the LED point source for softer, even light distribution. Electricians and lighting contractors replacing aging incandescent or halogen T4 G9 lamps in retrofit scenarios will find this a straightforward substitution. The compact maximum overall length of 1.34 inches fits fixtures with limited internal clearance typical of decorative sconce housings.

Key Features

• 2.5-watt LED replacing a 25-watt incandescent — equivalent lumen output at a fraction of the energy draw
• 280 lumens output with a 3,000 Kelvin warm white color temperature
• CRI of 80 for accurate color rendering in decorative and accent lighting
• Rated 15,000 hours service life, approximately 13.7 years at average use
• Frosted T4 envelope for diffused, glare-reduced light distribution
• Non-dimmable — compatible with standard on/off switching only
• Sold as a pack of 4 lamps per package

Compatibility

Designed as a direct LED replacement for 25-watt incandescent or halogen T4 lamps in G9 bi-pin base fixtures, including sconce luminaires. This lamp is non-dimmable and must be used on standard non-dimming circuits only.

Installation Notes

Always de-energize the fixture at the circuit breaker before removing or installing the lamp. Allow any existing halogen T4 lamp to cool fully before handling, as halogen envelopes retain heat. Confirm the fixture circuit is wired to a standard on/off switch — do not install this non-dimmable lamp on a dimmer-controlled circuit, as doing so may cause flickering or premature lamp failure. Lamp installation is a common task for licensed electricians or qualified maintenance personnel working under applicable NEC guidelines.