G E Lighting 93103493 Led Flame Bulb 3.5W Candelabra 2 Pack

Product Description

The G E LIGHTING 93103493 is a 2-pack of 3.5-watt LED flame-tip decorative bulbs designed to replace 40-watt incandescent bulbs with a fraction of the energy draw. Each bulb produces 330 lumens of soft white light at 2,700 Kelvin and carries a color rendering index (CRI) of 80, delivering warm, accurate color in decorative fixtures. The candelabra base (E12) fits the most common decorative socket type, and the clear flame-shaped envelope preserves the classic look expected in chandeliers, sconces, and accent lighting. Rated for 15,000 hours — approximately 13.7 years at typical use — these bulbs are a direct long-life replacement for standard incandescent flame-tip lamps.

These bulbs are suited for residential and light commercial decorative lighting applications including chandeliers, wall sconces, ceiling fans with decorative fixtures, and candelabra-style pendant lights. The dimmable design requires a compatible LED dimmer switch for smooth, flicker-free performance across the dimming range. Maximum overall length (MOL) is 4.20 inches, which should be verified against enclosed or tight-fitting fixture dimensions before installation.

Key Features

• 3.5-watt LED replaces 40-watt incandescent — significant energy reduction with equivalent light output
• 330 lumens, 2,700 Kelvin soft white output for warm decorative lighting
• CRI 80 for accurate, natural color rendering
• Dimmable — compatible with LED-rated dimmer switches
• Candelabra (E12) base fits standard decorative fixtures
• 15,000-hour rated life, approximately 13.7 years at average use
• Flame-tip clear envelope maintains traditional decorative appearance

Compatibility

Designed as a direct replacement for 40-watt incandescent candelabra-base flame-tip bulbs in standard E12 decorative fixtures. Verify fixture compatibility with dimmable LED bulbs before installation, as not all dimmer switches support LED loads.

Installation Notes

Installation requires no special tools — hand-tighten the E12 base into the socket until snug; do not overtighten. Turn off power to the fixture at the switch or circuit breaker before replacing bulbs. If used on a dimmer circuit, confirm the dimmer is rated for LED loads to avoid flicker or reduced lamp life. Verify that fixture enclosure dimensions accommodate the 4.20-inch MOL before seating the bulb.