G E Lighting 93100287 Led+ BR30 Color Changing Flood Bulb 8W

Product Description

The G E LIGHTING 93100287 is an 8-watt LED+ BR30 flood bulb designed to switch between two color temperatures without a dimmer or smart hub. Using only the standard wall switch, the bulb toggles between Soft White at 2,700 Kelvin and Daylight at 5,000 Kelvin, making it a practical retrofit in spaces where lighting mood changes are needed. It delivers 650 lumens output from 8 watts of power, making it equivalent in light output to a 65-watt incandescent. A CRI of 80 provides accurate color rendering for residential and light commercial interiors. Electricians and lighting contractors install this as a direct swap into any medium-base BR30 fixture.

This bulb is suited for recessed can fixtures, track lighting heads, and surface-mounted BR30-compatible fixtures in residential and light commercial applications. The 30-degree beam angle makes it appropriate for directional downlighting and accent work. The frost finish diffuses the LED point source for a smooth, uniform appearance. It ships in a boxed, single-unit package and is rated non-dimmable, so it must be installed on a non-dimming circuit. The switch-only color-change function requires no additional wiring, controllers, or apps.

Key Features

• Dual color temperature: toggles between 2,700K Soft White and 5,000K Daylight via wall switch
• 8 watts with 650 lumens output, equivalent to a 65-watt incandescent
• 30-degree flood beam angle in a BR30 form factor
• Medium base (E26) for direct replacement in standard recessed and track fixtures
• Non-dimmable, switch-only operation requiring no smart hub or controller
• Rated 15,000 hours service life, approximately 13.7 years at typical use

Compatibility

Designed as a direct replacement for standard 65-watt incandescent BR30 flood bulbs in medium-base (E26) recessed, track, and flood fixtures rated for BR30-sized lamps. Must be installed on a non-dimming circuit.

Installation Notes

Installation is performed by a qualified electrician or lighting technician. Always switch off the circuit and allow the existing bulb to cool before removal. Confirm the fixture and circuit are non-dimming before installation, as operating this bulb on a dimmer switch may damage the lamp or cause erratic behavior. No additional wiring or control devices are required to use the color-switching function.