G E Lighting 93095867 Led T8 U-bend Tube 13W 4000K

Product Description

The G E LIGHTING 93095867 is a 13-watt LED T8 U-bend replacement tube rated at 1,900 lumens with a 4,000 K cool white color temperature. It carries the model designation LED13ET8/U6/840/CONS and is designed as a direct retrofit for 32-watt fluorescent U-bend lamps in commercial and institutional lighting fixtures. The acrylic-sleeved tube uses a bi-pin base, operates on approved electronic ballasts, and is non-dimmable. With a rated life of 50,000 hours, it is well-suited for high-use environments where lamp change-out labor is a real cost. Lighting contractors and facilities maintenance electricians are the primary installers.

This tube is intended for use in 2x2 troffer and recessed fixtures that accept T8 U-bend lamps, common in offices, schools, retail spaces, and healthcare facilities. It is compatible with approved electronic ballasts only. The sleeved construction helps contain lamp fragments in the event of breakage, which is a common specification requirement in food service and healthcare settings. The lamp meets California Title 20 energy efficiency requirements, making it compliant for projects in California-regulated jurisdictions.

Key Features

• 13W LED output equivalent to a 32W fluorescent U-bend lamp
• 1,900 lumens at 4,000 K cool white color temperature
• CRI of 80 for acceptable color rendering in general commercial applications
• 50,000-hour rated life reduces maintenance frequency in high-run-time installations
• Acrylic sleeved construction for fragment containment
• California Title 20 compliant
• Non-dimmable; requires approved electronic ballast

Compatibility

Designed for use with approved electronic ballasts in fixtures accepting T8 U-bend lamps with a bi-pin base. Ballast compatibility should be verified against the manufacturer approved ballast list prior to installation.

Installation Notes

Installation should be performed by a qualified electrician in accordance with NEC requirements and local codes. De-energize the fixture completely and verify the ballast type is on the approved compatibility list before installing this lamp. This tube is non-dimmable and must not be connected to a dimming circuit. Do not install in enclosed fixtures unless the fixture is rated for use with LED lamps.