G E Lighting 31885 Led A15 Ceiling Fan Bulb 4.5W 2-pack

Product Description

The G E LIGHTING 31885 is a 2-pack of A15-shape LED ceiling fan bulbs designed for residential ceiling fan light kits. Each bulb delivers 270 lumens at 4.5 watts, replacing a standard 40W incandescent while drawing significantly less power. The frost finish diffuses light evenly across the A15 globe shape. Color temperature is rated at 2,850 Kelvin with a CRI of 90, placing it in the warm-white to pure-white range with accurate color rendering. Each bulb carries a medium base (E26) and is fully dimmable. Rated life is 15,000 hours, which equates to approximately 13.7 years at typical residential usage. These bulbs are sold in a boxed 2-pack and are intended for installation by electricians or knowledgeable homeowners.

These A15 LED bulbs are sized and rated for use in ceiling fan light fixtures, where the A15 globe profile fits the enclosed or semi-enclosed globe housings common to most residential fan kits. The 4.5W draw and dimmable circuitry make them suitable for fans wired to a compatible LED dimmer. The Reveal High Definition designation indicates the high-CRI output, which improves color accuracy in living rooms, bedrooms, and similar occupied spaces where ceiling fans are typically installed.

Key Features

• 4.5W LED replaces 40W incandescent, reducing energy consumption
• 270 lumens output with 2,850 Kelvin color temperature for warm, accurate light
• CRI of 90 for high-definition color rendering
• Frost A15 globe shape fits standard ceiling fan light kits with medium base sockets
• Fully dimmable with compatible LED dimmer controls
• Rated 15,000 hours (approximately 13.7 years) of service life
• 2-pack boxed for convenience on single-fixture installations

Compatibility

Designed as a direct replacement for 40W A15 incandescent bulbs in residential ceiling fan light fixtures using medium base (E26) sockets. Dimming performance depends on compatibility with the installed dimmer; verify dimmer is rated for LED loads before installation.

Installation Notes

Installation should be performed by a qualified electrician or competent DIYer familiar with NEC guidelines for lighting circuits. Always shut off power at the breaker and confirm the circuit is de-energized before removing or installing bulbs in an enclosed fan fixture. When used on a dimmer circuit, confirm the dimmer is rated for LED/CFL loads to avoid flickering or reduced bulb life. Do not exceed the fixture maximum wattage rating listed on the fixture label.