Friedrich FRA13NY30AJ1NALHP Condensing Unit 2.5 Ton 13 SEER2

Product Description

The FRIEDRICH FRA13NY30AJ1NALHP is a 2.5-ton residential split-system condensing unit rated at 30,000 BTU/h cooling capacity with a 13 SEER2 efficiency rating. It operates on R454B refrigerant, a lower-global-warming-potential refrigerant now required under current EPA regulations for new residential cooling equipment. The unit runs a single-stage compressor, delivering straightforward on/off cooling operation. Licensed HVAC technicians install and service this equipment as part of a matched split system alongside an indoor air handler or furnace coil.

This condensing unit is intended for residential split-system cooling applications. It is designed for single-stage operation, making it a direct-fit solution in standard residential replacement and new-construction installations where variable-capacity equipment is not required. The 13 SEER2 rating meets current minimum efficiency standards under the updated DOE regional requirements. Proper system performance depends on pairing with a matched, ARI-rated indoor coil or air handler.

Key Features

• 30,000 BTU/h cooling capacity at 2.5 nominal tons
• 13 SEER2 efficiency rating meets current DOE minimum standards
• R454B refrigerant compliance for current EPA A2L refrigerant regulations
• Single-stage compressor operation for straightforward system control

Compatibility

Designed as an OEM-style replacement or new-installation condensing unit for residential split-system cooling configurations. Specific matched indoor unit compatibility should be verified against FRIEDRICH published combination ratings prior to installation.

Installation Notes

Installation must be performed by an EPA Section 608-certified HVAC technician licensed to handle A2L refrigerants including R454B, which requires attention to ignition source controls and ventilation per current ASHRAE 15 and local mechanical code requirements. Disconnect and lock out all electrical power before any service work on the unit. The condensing unit must be installed on a level, stable pad with adequate clearance for airflow and service access as specified in the installation manual. Never attempt to retrofit this unit with a refrigerant other than R454B.

Technical Specifications

• Cooling Capacity: 30,000 BTU/h
• Nominal Tonnage: 2.5 tons
• SEER2 Rating: 13
• Refrigerant: R454B
• Compressor Staging: Single Stage

Standard Information

• Brand: FRIEDRICH
• Manufacturer Part Number: FRA13NY30AJ1NALHP