Freud LU74R010 Wet Dry Saw Blade 10 in 80 Tooth Carbide

Product Description

The FREUD LU74R010 is a carbide-tipped circular saw blade designed for smooth wood cutting in both wet and dry applications. Measuring 10 inches in diameter with 80 alternate top bevel (ATB) teeth, this blade delivers fine, splinter-resistant cuts in hardwood, softwood, and sheet goods. The 0.126-inch kerf width balances material removal with cut quality, while the 5/8-inch round arbor fits a wide range of standard table saws and miter saws. At 1.73 pounds, it is a full-size, professional-grade blade suited for cabinet shops, finish carpentry, and general millwork operations.

The LU74R010 is intended for use on 10-inch table saws, sliding compound miter saws, and radial arm saws equipped with a 5/8-inch arbor. The 80-tooth ATB configuration makes it well-suited for finish cuts on solid lumber, plywood, melamine, and veneer-faced sheet panels where surface quality matters. It is commonly installed by finish carpenters, cabinetmakers, and millwork contractors who require consistent, clean cross-grain and rip results in a single blade.

Key Features

• Carbide-tipped teeth for extended edge retention on hardwoods and engineered wood products
• 80-tooth alternate top bevel configuration for fine, smooth cuts with minimal tearout
• 10-inch diameter with 5/8-inch round arbor fits standard table saw and miter saw spindles
• 0.126-inch kerf width reduces material waste while maintaining cut stability
• Rated for both wet and dry cutting environments
• Blade body thickness of 0.071 inches provides stiffness without excess mass

Compatibility

Designed as an OEM-style replacement or upgrade blade for 10-inch table saws and miter saws accepting a 5/8-inch round arbor. Specific machine compatibility was not listed in the product data; verify arbor size and blade guard clearance before installation.

Installation Notes

Blade installation should be performed by a qualified tradesperson with the saw fully disconnected from power. Confirm arbor diameter and rotation direction before mounting, and torque the arbor nut to the tool manufacturer's specification using the supplied wrench. Inspect the blade for cracks or missing carbide before each use. Follow OSHA and tool manufacturer guidelines for blade-change procedures and blade guard reinstallation.