Freud FB-015 Forstner Bit 2 Inches High Speed Steel

Product Description

The FREUD FB-015 is a 2-inch Forstner bit from the Diablo Series, engineered for clean, flat-bottom holes in wood and most wood-based products. Constructed from high-speed steel, this bit delivers controlled cutting performance in residential and commercial woodworking applications. A sharp center spur locates the center of the hole accurately before the cutting edge engages, reducing wander and tear-out. With a 3-1/2 inch overall length and a 3/8 inch shank diameter, it fits standard drill chucks and drill presses used by carpenters, cabinetmakers, and finish contractors.

This Forstner bit is suited for drilling flat-bottom holes, pocket holes, and overlapping holes in solid wood, plywood, MDF, particleboard, and similar engineered wood panels. It is commonly used in cabinet installation, furniture fabrication, and door hardware boring. The 2-inch cut diameter makes it appropriate for hinge cup boring, shelf pin jigs, and larger through-hole applications where a clean edge and flat floor are required. Both bench-top drill presses and handheld drills with adequate torque can drive this bit effectively.

Key Features

• 2-inch cut diameter for flat-bottom and overlapping hole applications
• High-speed steel construction provides durability through repeated use in wood and wood composites
• Sharp center spur accurately centers the bit before cutting begins, reducing drift and tear-out
• 3/8-inch shank diameter fits standard drill press chucks and handheld drill drivers
• Suitable for flat-bottom holes, pocket holes, and overlapping hole patterns

Compatibility

Designed as a direct-fit Forstner bit for use with standard 3/8-inch and larger drill press chucks or handheld drills capable of accepting a 3/8-inch straight shank, compatible with wood, plywood, MDF, and most engineered wood products.

Installation Notes

This bit is installed by a carpenter, cabinetmaker, or skilled tradesperson using a drill press or handheld drill. Secure the workpiece firmly before drilling and confirm the drill chuck is tightened properly on the 3/8-inch shank before operation. Use appropriate RPM settings for the material and bit diameter — larger diameter Forstner bits generally require lower speeds. Clear chips regularly during deep cuts to prevent binding and heat buildup.