Freud DSP2060 Speed Demon Spade Bit 9/16x6 in 5 Pack

Product Description

The FREUD DSP2060 is a Speed Demon spade bit designed for fast, clean hole drilling in wood. Sold in a 5-piece package, each bit measures 9/16 inches in diameter and 6 inches in length. The self-feeding speed-tip design reduces the effort required to start and drive through material, increasing hole-making speed compared to standard spade bits. The curved paddle geometry actively clears chips from the hole during drilling, helping maintain cutting speed through the full depth of the bore. The shank is impact-rated for use in both cordless and corded impact drivers and drill drivers, adding durability under high-torque conditions.

This spade bit is suited for residential and commercial wood boring applications including rough framing, running electrical conduit or wiring through studs and joists, and plumbing rough-in work. The 6-inch length provides reach for drilling through standard framing lumber and engineered wood members. The impact-rated shank makes it a practical choice for electricians, plumbers, and carpenters working with cordless impact drivers on the job site. Compatible with standard hex-shank impact drivers and drill drivers.

Key Features

• Self-feeding speed-tip design starts fast and pulls the bit through the material with less applied pressure
• Optimized curved paddle promotes aggressive chip evacuation to sustain cutting speed and extend battery runtime
• Impact-rated shank engineered for increased stability and durability in cordless and corded impact drivers
• 9/16-inch diameter suits common wire and pipe clearance holes in framing lumber
• 6-inch length provides reach through standard stud and joist depths
• Sold as a 5-piece package for multi-hole or multi-crew applications

Compatibility

Designed for use in standard hex-shank cordless and corded drill drivers and impact drivers. Intended for drilling in wood and wood-based materials.

Installation Notes

Installation of this bit is typically performed by electricians, plumbers, and carpenters during rough-in phases. Secure the hex shank fully in the chuck or bit holder before operation. Wear appropriate eye protection when drilling, as chip ejection is aggressive by design. Inspect the bit shank for wear or deformation before each use, particularly when used in high-torque impact drivers.