Freud DSP2030 Speed Demon Spade Bit 3/8x6 in 5-pack

Product Description

The FREUD DSP2030 is a Speed Demon spade bit designed for fast, clean wood boring in both cordless and corded drill drivers and impact drivers. Sold in a 5-pack, each bit measures 3/8 inches in diameter and 6 inches in length. The high-performance speed-tip geometry self-feeds into the workpiece, reducing operator effort and increasing drilling speed compared to traditional spade bits. An optimized curved paddle design accelerates chip evacuation, which means more holes per battery charge on cordless tools. The shank is impact-rated for increased stability and durability under the high-torque demands of impact drivers.

The DSP2030 is suited for residential and light commercial rough-in work where electricians, plumbers, and general contractors need to bore through framing lumber, dimensional softwood, and similar wood substrates quickly. The 6-inch length allows the bit to reach through standard framing members in a single pass. The self-feeding tip reduces the need for center-punch marking and keeps the bit tracking straight during through-boring. This bit is compatible with both standard drill/drivers and impact drivers, making it a versatile addition to any trade tool kit.

Key Features

• Speed-tip self-feeding design reduces operator effort and increases boring speed vs. traditional spade bits
• Optimized curved paddle improves chip evacuation for more holes per battery charge
• Impact-rated shank provides stability and durability in cordless and corded impact drivers and drill/drivers
• 3/8-inch bore diameter in a 6-inch length for single-pass rough-in boring through standard framing
• Sold as a 5-pack for job-site redundancy and value

Compatibility

Designed for use with standard hex-shank cordless and corded drill/drivers and impact drivers suitable for wood boring applications.

Installation Notes

Installation of this bit is performed by electricians, plumbers, and carpenters during rough-in framing stages. Secure the bit firmly in the chuck before operation and confirm the driver is set to the appropriate speed range for spade bits. When boring near structural members, follow local building codes regarding minimum edge distances to avoid weakening framing. Wear appropriate eye protection, as chip evacuation at speed can eject debris.