Freud DSP1030 Speed Demon Spade Bit 5/8x4 in 5-pack

Product Description

The FREUD DSP1030 is a Speed Demon spade bit designed for fast, clean hole drilling in wood. The self-feeding speed-tip design reduces the effort required to start and advance the bit, improving drilling speed compared to traditional flat spade bits. A curved paddle geometry accelerates chip evacuation, which helps maintain cutting speed over extended use and extends battery runtime in cordless applications. The shank is impact-rated for use in both cordless and corded drill drivers and impact drivers, adding durability under high-torque conditions. Each package contains 5 bits.

This spade bit is suited for residential and light commercial rough-in work where fast wood boring is required. Typical applications include drilling through framing lumber, studs, and joists for wire, conduit, or pipe pass-throughs. The 5/8-inch diameter and 4-inch length make it a practical choice for standard rough-in clearance holes. The impact-rated shank handles the demands of production framing, remodel work, and repetitive drilling tasks where bit longevity matters. Electricians, plumbers, and carpenters are the primary installers.

Key Features

• Self-feeding speed-tip design reduces drilling effort and improves hole-making speed over traditional spade bits
• Optimized curved paddle geometry accelerates chip evacuation for sustained cutting performance
• Impact-rated shank provides stability and durability in cordless and corded drill drivers and impact drivers
• 5/8-inch diameter suits standard rough-in pass-through applications
• Packaged in a 5-count quantity for production and repetitive drilling tasks

Compatibility

Designed for use in standard cordless and corded drill drivers and impact drivers that accept 1/4-inch or larger hex shanks. Suitable for drilling clean holes in wood framing and similar soft materials.

Installation Notes

Spade bits of this type are installed by electricians, plumbers, and carpenters during rough-in phases. Confirm the driver chuck accepts the bit shank securely before operation. Keep the work area clear of obstructions behind the drilling surface, and use appropriate eye protection. Follow applicable NEC, IPC, or IFGC clearance requirements when boring through structural members.