Freud DCD050180H04G 5 Inch 180 Grit Sanding Disc 4 Pack

Product Description

The FREUD DCD050180H04G is a 4-pack of 5-inch, 180-grit random orbital sanding discs engineered for professional finishing work. Built on a hook-and-loop backing system with a 12-hole dust extraction pattern, these discs are designed for use with standard random orbital sanders. The ceramic blend abrasive removes material faster than conventional aluminum oxide discs while the Endura Bond grain bonding system keeps abrasive particles anchored through extended use. A Clog Shield coating reduces loading from sanding dust, which is the primary cause of premature disc failure. Woodworkers, finish carpenters, painters, and remodeling contractors will find these discs well-suited to fine surface prep and blending work.

These discs are intended for fine to medium finishing passes on wood, painted surfaces, and composite materials. The 180-grit classification makes them appropriate for final smoothing before staining or topcoat application, scuff-sanding between finish coats, and feathering paint edges during repair work. The 12-hole pattern aligns with standard random orbital sander dust port configurations, supporting effective dust extraction during operation. Each pack contains 4 discs.

Key Features

• Premium ceramic blend abrasive for faster material removal and extended disc life
• Endura Bond grain bonding system reduces shedding and prolongs cutting performance
• Clog Shield coating minimizes loading from fine sanding dust
• 12-hole dust extraction pattern compatible with standard random orbital sanders
• Hook-and-loop backing for fast disc changes without tools
• 180 grit for fine finishing, between-coat scuffing, and surface prep before topcoat

Compatibility

Designed for use with 5-inch random orbital sanders equipped with hook-and-loop disc retention and a 12-hole or compatible dust extraction port pattern.

Installation Notes

Attach the disc firmly to a clean, dry sander pad before powering on the tool. Inspect the hook-and-loop pad surface for debris or worn hooks that can cause disc slippage during use. Allow the sander to reach full speed before contacting the work surface, and lift the tool before powering down to avoid swirl marks. Replace discs when cutting action decreases noticeably or when abrasive loading cannot be cleared by tapping the disc.