Fna Group 41107 Pressure Washer Hose 3200 Psi M22

Product Description

The FNA GROUP 41107 is a 1/4-inch by 25-foot replacement pressure washer hose rated to 3,200 PSI. Built with Morflex Technology, it uses a lightweight polyester braid construction that reduces handling fatigue compared to standard rubber hoses. The polyurethane outer jacket is non-marring and abrasion resistant, making it suitable for use on decks, vehicles, and finished surfaces without leaving scuff marks. It terminates in threaded M22 connections equipped with a dual O-ring design to provide a secure, leak-resistant seal. Maximum operating temperature is rated at 140 degrees F. Licensed contractors and pressure washer service technicians are the primary installers for this type of hose.

This hose is intended for use with gas-powered pressure washers that accept standard threaded M22 connections. The 25-foot length provides reach for residential exterior cleaning, fleet washing, and light commercial applications. The Morflex Technology construction prioritizes high flexibility and kink resistance, reducing service interruptions caused by hose kinking during operation. It is sold as a single unit and is suited for both replacement and spare-hose applications in the field.

Key Features

• 3,200 PSI pressure rating for high-demand gas pressure washer use
• Morflex Technology construction with lightweight polyester braid for kink resistance and flexibility
• Threaded M22 connections with dual O-ring design for secure, leak-resistant attachment
• Polyurethane outer jacket is non-marring and abrasion resistant
• Maximum operating temperature of 140 degrees F
• 1/4-inch inner diameter at 25 feet for standard flow applications

Compatibility

Designed to fit most gas pressure washers equipped with standard threaded M22 connections.

Installation Notes

Shut off and fully depressurize the pressure washer before disconnecting or installing the hose. Hand-tighten the M22 threaded connections and confirm the dual O-rings are seated before applying pressure. Inspect connections for leaks before resuming operation. Avoid exceeding the rated 3,200 PSI or 140 degrees F operating limits to prevent hose failure.