Fluke FLK-T3000FC Kit Fc Wireless Temperature Kit 6 Pc

Product Description

The FLUKE FLK-T3000FC KIT is a six-piece FC wireless temperature measurement kit designed for field electrical and HVAC diagnostics. Built around the Fluke 3000 FC Series Wireless Multimeter and the Fluke t3000 K-Type Thermocouple Thermometer, the kit allows technicians to measure AC and DC current up to 400 milliamps, voltage up to 1,000 volts, resistance up to 600 ohms, and capacitance up to 9,999 microfarads. The LCD display provides 6,000-count resolution. Licensed electricians, HVAC technicians, and instrumentation professionals use this kit for live panel diagnostics, motor circuit analysis, and temperature logging without clustering leads at a single meter.

This kit is suited for both residential and light commercial applications where wireless test-point monitoring reduces clutter and improves safety during live-circuit work. The included K-Type thermocouple thermometer makes it practical for HVAC technicians measuring supply and return air temperatures, refrigerant line temperatures, or heat exchanger surface temps. The kit supports a frequency counter up to 100 Hz and carries a minimum operating temperature of -10 degrees C and a maximum of 50 degrees C, covering typical field service environments. The magnetic hanging strap allows hands-free mounting on panel doors or equipment frames during service calls.

Key Features

• FC wireless connectivity between the Fluke 3000 FC Series Multimeter and accessories for remote test-point monitoring
• Fluke t3000 K-Type Thermocouple Thermometer included for surface and air temperature measurement
• Measures up to 1,000 volts, 400 mA AC and DC, and up to 600 ohms resistance
• 6,000-count LCD display with capacitance measurement up to 9,999 microfarads
• Frequency counter capability up to 100 Hz for motor and drive diagnostics
• Magnetic hanging strap and AC175 alligator clips included for hands-free panel work

Compatibility

Designed for use within the Fluke 3000 FC Series wireless ecosystem. Compatible accessories include AC175 alligator clips and TL175 test leads, both included in this kit. Other K-Type temperature probes are also compatible per manufacturer documentation.

Installation Notes

This kit is intended for use by qualified electricians and HVAC technicians familiar with NEC safety practices for live-circuit work. Always de-energize and verify absence of voltage before connecting or disconnecting test leads on circuits where safe to do so; follow site-specific lockout/tagout procedures where required. Inspect test leads and alligator clips for insulation damage before each use. The meter is rated for CAT III environments — confirm the installation category of the circuit under test before connecting.