Flood FLDES112/05 Cedar Wood Stain Sealer 5 Gallon

Product Description

The FLOOD PPG ARCHITECTURAL FIN FLDES112/05 is an oil-based wood stain and sealer formulated for exterior woodcare applications. It delivers a one-coat finish in a Natural Cedar tone, combining stain and sealer in a single product to reduce labor time on the job. The formula is engineered for streak-free application, eliminating runs and lap marks that slow down finishing work. At 5 gallons, the container size suits full deck refinishing, fence line work, and siding projects where coverage volume matters. Licensed contractors and experienced DIYers handling outdoor wood restoration will find the single-pass application efficient and straightforward.

FLDES112/05 is recommended for decks, fences, siding, and other outdoor wood surfaces exposed to weather and UV. The oil-based formulation penetrates wood grain to provide both color and moisture protection in one step. It is suited for residential and light commercial exterior wood surfaces where a natural cedar appearance is specified. The 5-gallon unit is well-matched to larger surface areas where multiple smaller containers would add handling time and increase the risk of color inconsistency between batches.

Key Features

• Oil-based stain and sealer combined in a single product for one-coat application
• Streak-free formula designed to prevent runs and lap marks
• Natural Cedar finish tone for exterior wood surfaces
• 5-gallon container suited for decks, fences, siding, and large outdoor wood areas
• Reduces project time with a one-pass application process

Compatibility

Designed for use on exterior wood surfaces including decks, fences, siding, and other outdoor wood structures. Intended for bare or previously stained wood surfaces compatible with oil-based penetrating finishes.

Installation Notes

Application should be performed by a painting or finishing contractor or a qualified tradesperson familiar with exterior wood coatings. Wood surfaces must be clean, dry, and free of loose or peeling existing finish before application. Follow all local VOC regulations and ventilation requirements when working with oil-based products. Consult the product data sheet for surface preparation requirements and recoat windows before beginning work.