Flexaust 6015008050 Polyethylene Hose 1.5in Id 50ft

Product Description

The FLEXAUST 6015008050 is a commercial-grade polyethylene hose designed for vacuum and low-pressure transfer applications across industrial and trade service environments. Built with a 1-1/2 inch inside diameter and rated to 16 psi working pressure with a vacuum rating of 29 Hg, this hose handles demanding suction and pressure duties in a single flexible assembly. Its crush-resistant construction and 2.75 inch bend radius allow routing through tight spaces without kinking or collapsing the flow path. The hose spans 50 feet in length and operates across a temperature range of -40 to 140 degrees F, making it suitable for year-round use in both indoor and outdoor service conditions. HVAC technicians, industrial service contractors, and facilities maintenance crews are the primary installers.

This hose is suited for commercial and light industrial applications where a flexible, lightweight polyethylene conduit is needed for material transfer, vacuum service, or ventilation ducting. The gray color and 50-foot continuous length reduce the need for mid-run couplings, lowering potential leak points in the system. It performs reliably in environments where temperatures fluctuate significantly, particularly in mechanical rooms, rooftop units, and outdoor equipment enclosures.

Key Features

• 1-1/2 inch inside diameter for compatibility with standard commercial hose fittings
• 16 psi maximum working pressure and 29 Hg vacuum rating for dual-duty service
• Crush-resistant polyethylene construction maintains flow path under compression
• 2.75 inch bend radius allows tight routing without collapsing
• 50-foot length minimizes inline connections and potential leak points
• Rated from -40 to 140 degrees F for year-round indoor and outdoor use

Compatibility

Designed as a commercial-grade replacement hose for vacuum and low-pressure transfer systems requiring a 1-1/2 inch ID polyethylene flexible hose assembly.

Installation Notes

Installation should be performed by a qualified HVAC technician or industrial service contractor familiar with hose routing and fitting connections. De-pressurize and shut down the connected system fully before removing or attaching hose assemblies. Ensure all couplings and clamps are rated to match or exceed the 16 psi working pressure of this hose. Avoid exceeding the rated bend radius of 2.75 inches to prevent internal flow restriction or structural fatigue over time.