Federal Signal Corporation FSEX-24PMC-MOD Explosion Proof Strobe

Product Description

The FEDERAL SIGNAL CORPORATION FSEX-24PMC-MOD is a 24-volt explosion proof strobe light designed for use in hazardous location environments classified under Class I, Division 1 (CID1) standards. Built with a red housing and clear lens, this unit provides high-visibility visual signaling in areas where flammable gases, vapors, or combustible dust may be present. It is sold as a single unit and is installed by qualified electricians or industrial safety technicians working in compliance with applicable electrical and hazardous location codes.

This strobe is intended for industrial, commercial, and infrastructure applications where CID1-rated visual warning devices are required. Typical installations include petrochemical facilities, refineries, wastewater treatment plants, grain handling operations, and other environments where National Electrical Code (NEC) Article 500 hazardous location classifications apply. The red housing provides clear visual identification of the device type on the floor or in the field.

Key Features

• Rated for Class I, Division 1 hazardous locations per NEC Article 500
• Operates at 24 volts for compatibility with low-voltage signaling and alarm systems
• Red housing with clear lens for high-contrast visual signal output
• Explosion proof construction suitable for environments with flammable gases or vapors
• Single-unit packaging for straightforward replacement or new installation

Compatibility

Designed as an OEM-style replacement or new-installation strobe for Class I, Division 1 rated visual signaling systems operating at 24 volts.

Installation Notes

Installation must be performed by a licensed electrician qualified in hazardous location work in accordance with NEC Article 500 and all applicable local codes. De-energize the circuit and verify lockout/tagout procedures are complete before handling any wiring or conduit connections. All conduit seals and fittings must meet the requirements of the hazardous location classification. Do not install in locations exceeding the device's rated classification without verifying suitability.