Falcon Stainless FAL-SWC2-24 Water Softener Connector 2in Fip

Product Description

The FALCON STAINLESS FAL-SWC2-24 is a flexible stainless steel corrugated water softener connector designed for residential and light commercial water treatment installations. It features a 2-inch female iron pipe (FIP) connection on each end and measures 24 inches in length. The corrugated stainless steel construction offers a large inner diameter that supports higher flow rates than traditional copper or braided flexible lines. Plumbers and water treatment technicians install this connector to provide a reliable, flexible link between the water softener unit and the supply or drain piping.

This connector is suited for use in water softener installations where flexibility and corrosion resistance are required. The 2-inch FIP sizing accommodates higher-flow residential and commercial softener systems. The 24-inch length provides enough slack to ease alignment during installation and absorb minor vibration or movement in the line without stressing the fittings. It is commonly used in new installations and as a direct replacement in existing water softener setups.

Key Features

• Corrugated stainless steel construction for durability and corrosion resistance
• Large inner diameter supports higher flow rates than copper or braided alternatives
• 2-inch FIP connections on each end for secure threaded attachment
• 24-inch flexible length eases alignment and absorbs line movement
• Suitable for both new installations and replacement applications

Compatibility

Designed as an OEM-style replacement or new-install connector for water softener systems requiring a 2-inch FIP flexible stainless steel connection.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and depressurize the line before removing any existing connectors or fittings. Use thread sealant tape or pipe dope on all FIP threads and hand-tighten before applying final torque with a wrench. Do not over-bend or kink the corrugated section during routing.

Technical Specifications

• Connection Type: 2 inch FIP x 2 inch FIP
• Length: 24 inches
• Material: Corrugated Stainless Steel

Standard Information

• Brand: FALCON STAINLESS
• Manufacturer Part Number: FAL-SWC2-24