Everflow ftgc-yc12-48n Gas Connector 48 in Mip X Mip 3/4 in

Product Description

The EVERFLOW ftgc-yc12-48n is a yellow coated stainless steel flexible gas connector designed for connecting gas appliances to residential or light commercial supply lines. The connector measures 48 inches in length with a 1/2-inch inner diameter and 5/8-inch outer diameter. It is rated for up to 106,000 BTU/h on natural gas and up to 169,600 BTU/h on liquid propane, making it suitable for a range of gas-fired appliances. The yellow coating provides corrosion resistance and visual identification as a gas-service connector. This part is typically installed by licensed plumbers or gas fitters.

This connector is used in residential and light commercial applications where a flexible connection is needed between a gas shutoff valve and an appliance such as a range, dryer, water heater, or furnace. The 3/4-inch MIP x MIP end fittings allow direct connection to standard gas supply lines and appliance inlets. The 48-inch length provides adequate reach for most standard rough-in configurations where some flexibility in appliance positioning is required.

Key Features

• Yellow coated stainless steel construction for corrosion resistance and gas-line identification
• Rated 106,000 BTU/h for natural gas and 169,600 BTU/h for liquid propane
• 48-inch length accommodates a wide range of appliance rough-in distances
• 3/4-inch MIP x MIP end fittings for standard gas supply connections
• 1/2-inch inner diameter with 5/8-inch outer diameter flexible stainless steel body

Compatibility

Designed as a standard flexible gas connector for residential and light commercial gas appliances with 3/4-inch MIP inlet and outlet connections, compatible with both natural gas and liquid propane supply systems.

Installation Notes

Installation must be performed by a licensed plumber or qualified gas fitter in accordance with local codes and IFGC requirements. Shut off the gas supply at the main valve before disconnecting or connecting any gas line components. Apply approved thread sealant or gas-rated PTFE tape to all threaded connections and verify for leaks with a listed leak-detection solution after installation. Flexible gas connectors must not be concealed inside walls, floors, or ceilings per most applicable codes.