Enerpac HA9210 Hydraulic Pump Hose 10000 Psi 10 Ft

Product Description

The ENERPAC HA9210 is a high-pressure hydraulic pump hose rated for up to 10,000 psi of working pressure. Built from rubber with a black outer jacket, this hose measures 1/4 inch inside diameter and 10 feet in overall length. One end terminates in a 3/8 inch NPTF male connection, while the opposite end uses an AH-604 fitting. At 4.3 pounds, it is a practical replacement or extension hose for hydraulic hand pumps and hydraulic tool systems used in industrial, construction, and maintenance applications. Licensed hydraulic equipment technicians and maintenance professionals handle installation.

This hose is suited for use with hydraulic hand pumps and related hydraulic tooling that operate at or below 10,000 psi. It fits applications in structural steel work, heavy equipment maintenance, pipe bending, and general industrial hydraulic service where a 10-foot working length and 1/4 inch bore are required. The 3/8 inch NPTF thread end provides a pressure-rated sealed connection to compatible pump ports and cylinders.

Key Features

• 10,000 psi maximum working pressure rating
• 1/4 inch inside diameter for compatibility with standard high-pressure hydraulic circuitry
• 10-foot overall length gives reach between pump and work point
• Rubber construction provides flexibility and abrasion resistance in field conditions
• 3/8 inch NPTF threaded end delivers a leak-resistant pressure-rated seal
• AH-604 opposite end fitting for direct connection to ENERPAC pump and cylinder ports

Compatibility

The opposite hose end uses an AH-604 fitting, which is stated in the product data. Designed as a replacement or auxiliary hose for hydraulic hand pump systems operating at up to 10,000 psi with 3/8 inch NPTF port connections.

Installation Notes

Hydraulic hose replacement should be performed by a qualified technician familiar with high-pressure hydraulic systems. Depressurize the hydraulic circuit completely and relieve all stored hydraulic pressure before disconnecting any hose. Inspect threads on both ends for damage before making connections, and confirm thread standards match the pump and cylinder ports to prevent leaks under pressure. Do not exceed the 10,000 psi rated working pressure of this hose.