Emuge F0563310 Tapping Adapter 1/2 in Tap Series EM03

Product Description

The EMUGE F0563310 is a quick-change tapping adapter designed for use with 1/2 inch tap sizes and sized as a Number 3 adapter in the EM03 series. It accommodates a tap shank diameter of 0.367 inches and a tap square size of 0.275 inches. Built with through-coolant capability, it supports high-performance tapping operations where coolant delivery directly to the cutting zone is required. The adapter measures 1.81 inches in overall length with a flange diameter of 1.89 inches and an outside shank diameter of 1.22 inches. It is installed by machinists and toolroom technicians in CNC machining centers and tapping machines.

The F0563310 is suited for production tapping applications in machining environments where quick-change tooling systems are used to reduce setup time. The through-coolant feature makes it appropriate for tapping harder materials or deep-hole applications where heat and chip evacuation are concerns. It fits into quick-change tool holding systems that accept the EM03 series adapter interface. A projection of 0.43 inches provides controlled reach for standard tapping depths in typical workpiece setups.

Key Features

• Quick-change interface reduces tap changeout time during production runs
• Through-coolant capable for improved tool life and chip evacuation
• Tap shank diameter of 0.367 inches and tap square size of 0.275 inches for secure tap retention
• Overall length of 1.81 inches with a 0.43 inch projection for controlled reach
• EM03 series designation ensures compatibility within the EMUGE quick-change adapter system
• Flange diameter of 1.89 inches and outside shank diameter of 1.22 inches for stable seating in the holder

Compatibility

Designed for use with 1/2 inch taps having a shank diameter of 0.367 inches and a square size of 0.275 inches, within quick-change tapping systems that accept EM03 series adapters.

Installation Notes

Installation is performed by qualified machinists or toolroom technicians. Ensure the machine spindle and coolant supply are fully shut down before mounting or removing the adapter. Verify that the mating quick-change holder is clean and free of chips or debris before seating the adapter. Confirm coolant passage alignment when through-coolant is used to avoid restricted flow during operation.