Emuge 2649TZ.0375 Carbide Square End Mill 3/8in 4-flute

Product Description

The EMUGE 2649TZ.0375 is a solid carbide square end mill engineered for both roughing and finishing operations in a single tool. Built with four flutes and a 45-degree helix angle, it delivers aggressive material removal while maintaining a quality surface finish. The TiAlN coating extends tool life in high-heat cutting environments, making it well-suited for ferrous and hardened materials. It carries a 7/8 inch length of cut and an overall length of 2-3/4 inches, with a 3/8 inch shank diameter. Machinists and tool-and-die professionals select this series when a long-reach, single-end configuration is required without sacrificing rigidity.

This end mill is intended for CNC machining centers and manual mills where combined roughing and finishing passes reduce cycle time. The extended reach design suits deep-pocket milling, slotting, and profiling applications where standard-length tools cannot reach. Right-hand cutting direction and right-hand flute spiral are standard for conventional spindle setups. It performs in steel, stainless steel, cast iron, and similar hard materials where TiAlN coating provides thermal resistance at elevated cutting speeds.

Key Features

• Solid carbide construction for rigidity and wear resistance in hard materials
• TiAlN coating provides thermal barrier for high-speed dry or semi-dry cutting
• 45-degree helix angle supports aggressive chip evacuation during roughing passes
• Four-flute geometry allows finishing-quality surface finish in the same pass
• Extended reach, long-length configuration for deep-pocket and profiling work
• Single-end, right-hand cut with right-hand flute direction for standard CNC setups

Compatibility

Designed as an OEM-style cutting tool for use in standard 3/8 inch collet chucks, end mill holders, or shrink-fit tooling systems on CNC machining centers and manual vertical mills.

Installation Notes

Installation is performed by qualified machinists or CNC setup technicians. Ensure the spindle is fully stopped and the machine is in a safe state before changing tooling. Seat the shank fully into the holder and torque set screws or collet nuts to the toolholder manufacturer specifications. Verify runout with a dial indicator before beginning a cut, as excessive runout accelerates edge wear on carbide tooling.