Emuge 1715A.090250 Chamfer Mill 4 Flutes Solid Carbide

Product Description

The EMUGE 1715A.090250 is a 4-flute solid carbide chamfer mill designed for precision chamfering operations on metallic workpieces. The cutter features a TiAlN coating that extends tool life under high-heat cutting conditions common in production environments. With a 1/4 inch cutter head diameter and a 2.5 inch overall length, this mill fits compact tooling setups while maintaining rigidity during chamfer passes. Machinists and tool and die professionals reach for this tool when consistent chamfer geometry and edge quality are required on ferrous and non-ferrous materials.

This chamfer mill is suited for use in CNC machining centers and manual mills where deburring, edge preparation, and chamfering of drilled or milled features are part of the operation. The 1/4 inch shank diameter makes it compatible with standard collet systems and toolholders commonly found in job shops and precision manufacturing facilities. Typical applications include chamfering hole entries, preparing edges for thread relief, and breaking sharp corners on machined components.

Key Features

• 4-flute geometry for improved feed rates and surface finish on chamfer cuts
• Solid carbide construction for rigidity and wear resistance
• TiAlN coating extends tool life in high-temperature cutting environments
• 1/4 inch cutter head diameter suited for small-feature chamfering
• 2.5 inch overall length provides reach without sacrificing tool stiffness
• No coolant-through design - compatible with flood or mist coolant applied externally

Compatibility

Designed for use in standard 1/4 inch collet chucks and toolholders on CNC machining centers and manual knee mills. Intended for chamfering applications on ferrous and non-ferrous workpiece materials.

Installation Notes

A licensed machinist or qualified tool operator should install this end mill into a clean, properly sized collet or toolholder, ensuring the shank is fully seated and the retention torque meets the toolholder manufacturer specification. Inspect the cutting edges before use and confirm runout is within acceptable limits for the application. Do not exceed the cutter's rated speed and feed parameters for the workpiece material. Secure the workpiece fully before engaging the cutter.