Emtek 8121NWUS10B Norwich Knob Passage Set Oil Rubbed Bronze

Product Description

The EMTEK 8121NWUS10B is a Norwich knob passage set finished in Oil Rubbed Bronze, designed for interior doors that do not require locking hardware. The set includes a rectangular rose and is configured for a 2-3/8 inch backset, fitting doors ranging from 1-1/4 inches to 2 inches in thickness. The Norwich knob features a traditional profile suited to classic and transitional interior design schemes. Installation is handled by carpenters, finish contractors, or experienced DIYers during new construction or renovation work. The oil rubbed bronze finish provides a dark, mildly textured surface appearance consistent with period and transitional hardware aesthetics.

This passage set is intended for interior doors such as hallway doors, closet doors, and room entries where a latch function is needed but no privacy or keyed lock is required. The rectangular rose provides a clean, defined wall-plate appearance at the door face. The 2-3/8 inch backset is the standard dimension for most residential interior door prep, and the door thickness range of 1-1/4 inches to 2 inches covers standard residential hollow-core and solid-core interior slabs. Each unit is sold individually.

Key Features

• Passage function — latch only, no locking mechanism
• 2-3/8 inch backset for standard residential interior door prep
• Compatible with door thickness from 1-1/4 inches to 2 inches
• Rectangular rose included
• Oil Rubbed Bronze finish with traditional dark patina appearance
• Norwich knob profile suited to classic and transitional interiors

Compatibility

Designed as a passage-function replacement or new-installation knob set for residential interior doors with a standard 2-3/8 inch backset and a thickness between 1-1/4 inches and 2 inches, paired with a rectangular rose mounting plate.

Installation Notes

Installation is performed by finish carpenters or qualified contractors following standard door hardware procedures. Verify the existing or planned bore hole diameter and backset measurement before ordering, as these must match the hardware configuration. No power tools are required beyond a drill for latch bore preparation on new doors. Follow the manufacturer-supplied template and instruction sheet included with the hardware for proper rose and latch alignment.