Emtek 8100CUS15RH Cortina Lever Passage Set Satin Nickel

Product Description

The EMTEK 8100CUS15RH is a right-hand Cortina lever passage set finished in Satin Nickel, designed for interior doors that require latching without a locking function. It ships with a 2-3/8 inch backset latch and mounts on a regular rose plate. The lever fits doors ranging from 1-1/4 inches to 2 inches in thickness, making it suitable for standard residential and light commercial interior door applications. Licensed locksmiths, finish carpenters, and general contractors typically install this hardware during new construction or renovation work. The Satin Nickel finish provides a clean, low-sheen appearance consistent with contemporary and transitional interior design schemes.

This passage set is intended for interior doors where privacy or security is not required, such as hallways, closets, living rooms, and dining rooms. The right-hand designation refers to the handing of the lever trim. The regular rose format offers a traditional, low-profile mounting plate suited to standard door prep. Door thickness compatibility ranges from 1-1/4 inches to 2 inches, which covers the majority of pre-hung and slab interior doors found in residential construction.

Key Features

• Passage function — latches without locking, suited for interior non-privacy doors
• Right-hand handing for correct lever orientation on right-hand swing doors
• 2-3/8 inch backset latch included
• Compatible with door thicknesses from 1-1/4 inches to 2 inches
• Regular rose plate for a traditional, low-profile trim appearance
• Satin Nickel (CUS15) finish for a matte, corrosion-resistant surface

Compatibility

Designed as a passage lever set for standard residential and light commercial interior doors with a 2-3/8 inch backset and door thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter, locksmith, or experienced general contractor. Confirm door handing before installation to ensure the lever operates in the correct direction. Standard door prep tools apply, including a hole saw set for the cross-bore and latch bore. No electrical shutoff is required for this product; however, verify the door thickness and backset measurement before beginning to avoid misalignment of the latch face plate.