Emtek 5210HLOUS4RH.RLS Helios Lever Privacy Set Satin Brass

Product Description

The EMTEK 5210HLOUS4RH.RLS is a right-hand Helios lever privacy set finished in Satin Brass, designed for interior doors where single-room privacy locking is required. The set ships with a 2-3/8 inch backset radius latch and a square rose, providing a clean, contemporary profile at the door face. It is configured for doors ranging from 1-1/4 inches to 2 inches in thickness, covering most standard residential interior door stock. Locksmiths, finish carpenters, and general contractors install this hardware during new construction or renovation work. The privacy function allows locking from one side without a keyed cylinder, making it suitable for bathrooms, bedrooms, and home offices.

This privacy lever set is intended for interior residential applications where passage privacy is needed. The right-hand configuration applies to doors with the hinge on the left and the latch on the right when viewed from the exterior or pull side. The square rose and Satin Brass finish suit transitional and contemporary interior design schemes. The included radius latch strike coordinates with the lever style for a matched installation. The set is custom assembled and sold as a single unit, making it a complete hardware solution for one door.

Key Features

• Privacy function — lever locks from inside without a key, ideal for bathrooms and bedrooms
• Right-hand orientation with 2-3/8 inch backset radius latch included
• Square rose escutcheon in Satin Brass finish
• Fits door thickness range of 1-1/4 inches to 2 inches
• Helios lever style with contemporary profile
• Complete set — lever, rose, latch, and strike included

Compatibility

Designed as an OEM-style privacy lever replacement or new installation for standard residential interior doors with a 2-3/8 inch backset and door thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter or locksmith using a drill, hole saw, and chisel for mortising the latch face plate. Confirm door hand and backset measurement before installation — reversing a handed lever set after mounting will require full disassembly. Privacy levers do not require a keyed cylinder, but the emergency release pinhole on the exterior rose should remain unobstructed for emergency access. Follow local building codes for interior door hardware requirements in residential occupancies.