Emtek 5210HECUS19LH Hercules Lever Privacy Set Flat Black

Product Description

The EMTEK 5210HECUS19LH is a left-hand Hercules lever privacy set finished in Flat Black, designed for interior doors where a passage lock with one-sided turn button is required. The set includes a lever handle mounted on a square rose and is configured for a 2-3/8 inch backset. It fits doors ranging from 1-1/4 inches to 2 inches in thickness. This hardware is assembled to order and sold as a single unit. Licensed contractors, finish carpenters, and experienced door hardware installers typically handle specification and installation of this type of lockset.

This privacy lever set is intended for interior residential or light commercial applications such as bedrooms and bathrooms, where occupancy indication and interior privacy locking are needed without a keyed cylinder. The left-hand designation applies to the hinge side and swing direction of the door, so confirm hand orientation before ordering. The square rose provides a clean, contemporary mounting profile suited to modern and transitional interior design schemes. No specific compatible model families are stated in the product data beyond the door thickness and backset ranges noted above.

Key Features

• Left-hand configuration for correct lever orientation on left-hand doors
• Privacy function — interior turn button with no keyed access
• 2-3/8 inch backset fits standard interior door prep
• Fits door thicknesses from 1-1/4 inches to 2 inches
• Square rose mounting plate for a clean, geometric profile
• Flat Black finish for a consistent, matte appearance

Compatibility

Designed as an OEM-style privacy lever replacement or new installation for interior doors with a standard 2-3/8 inch backset and a thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter, door hardware installer, or licensed contractor. Confirm door hand orientation and backset measurement before beginning installation. A standard door prep with a 2-1/8 inch bore hole is required for most lever privacy sets of this type. Follow all applicable local building codes for interior door hardware installation.