Emtek 5209STUUS15LH Stuttgart Lever Privacy Set Satin Nickel

Product Description

The EMTEK 5209STUUS15LH is a Stuttgart-style lever privacy set in a Satin Nickel finish, designed for interior doors where passage privacy is required. This left-hand configuration ships with a disk rose and a 2-3/8 inch backset latch, fitting doors ranging from 1-1/4 inches to 2 inches in thickness. The assembly covers full-door hardware replacement in a single unit, weighing 2.5 pounds. Residential finish carpenters, general contractors, and skilled DIYers handle this type of installation. The Stuttgart lever profile pairs with the disk rose to deliver a clean, architectural look suited to transitional and modern interior design themes.

This privacy set is intended for interior rooms where a turn-button or push-button lock is needed — bedrooms, bathrooms, and home offices are typical applications. The left-hand designation applies to the latch handing as configured from the factory. The 2-3/8 inch backset accommodates standard interior door prep found in most residential construction. Door thickness compatibility spans 1-1/4 inches to 2 inches, covering both hollow-core and solid-core interior slabs.

Key Features

• Stuttgart lever design paired with a disk rose for a clean, low-profile appearance
• Left-hand configuration factory-set for correct latch orientation
• 2-3/8 inch backset fits standard interior door bore preparation
• Compatible with door thicknesses from 1-1/4 inches to 2 inches
• Satin Nickel finish (US15) for corrosion resistance in interior environments
• Privacy function with interior turn or push button — no keyed entry

Compatibility

Designed as an OEM-style replacement or new-installation privacy lever set for standard interior doors with a 2-1/8 inch cross-bore and 2-3/8 inch backset, compatible with door thicknesses from 1-1/4 inches to 2 inches.

Installation Notes

Installation requires a standard 2-1/8 inch cross-bore and 1 inch edge bore on the door slab; verify existing prep before ordering. Shut off any powered door systems and remove the existing hardware before beginning. A Phillips screwdriver and a latch-face chisel are typical tools for this work. Handing must be confirmed at time of order — this unit is factory-configured left-hand and is not field-reversible without contacting the manufacturer.