Emtek 5112US19.LSUS19.KNUS19.RH Passage Set Flat Black Rh

Product Description

The EMTEK 5112US19.LSUS19.KNUS19.RH is a complete right-hand passage set from the Emtek Select line, combining a Modern Rectangular rosette, an L-Square stem, and a Knurled lever in a Flat Black finish. Passage sets have no locking function and are used on interior doors where privacy is not required. This set ships as a complete assembly with the stem and handle permanently affixed, and includes a latch, strike plate, and dust box. It accommodates door thicknesses from 1-3/8 inches to 2-1/4 inches and uses a standard 2-1/8 inch bore prep. The supplied latch is configured for a 2-3/8 inch backset, with a 2-3/4 inch backset available if specified at time of order.

This passage set is suited for residential interior doors such as hallway, closet, and common-area applications where a clean, modern hardware profile is desired. The Modern Rectangular rosette provides a low-profile, contemporary look that works with transitional and modern interior door designs. Right-hand configuration must be confirmed before ordering, as the stem orientation is fixed after assembly. Installers should verify door prep dimensions - bore diameter and backset - before installation to ensure compatibility with the existing or planned door prep.

Key Features

• Complete passage set - includes latch, strike plate, and dust box
• Fits door thickness from 1-3/8 inches to 2-1/4 inches
• Standard 2-1/8 inch bore door prep required
• Standard 2-3/8 inch backset latch; 2-3/4 inch backset available on request
• Supplied with a 28-degree rotation latch
• Stem and handle are permanently affixed - no field adjustment
• Flat Black finish on rosette, stem, and Knurled lever

Compatibility

Designed for interior doors with a standard 2-1/8 inch bore prep and door thickness between 1-3/8 inches and 2-1/4 inches. Right-hand orientation only for this configuration.

Installation Notes

Installation is typically performed by a finish carpenter or general contractor as part of interior door hardware work. Power down any associated electronic access components before servicing nearby hardware. Confirm door hand orientation before installation, as the stem and handle are permanently affixed and cannot be reversed in the field. Verify bore diameter, backset, and door thickness against the specifications above before cutting or drilling any door prep.