Emtek 5112ROUUS15 Round Knob Passage Set Satin Nickel

Product Description

The EMTEK 5112ROUUS15 is a round knob passage set finished in satin nickel, designed for interior doors that do not require locking hardware. It pairs a round knob with a modern rectangular rose to deliver a clean, architectural look suited to contemporary and transitional interiors. The passage function allows free rotation in both directions, making it appropriate for hallways, closets, and common areas. This set is configured for a 2-3/8 inch backset and accommodates door thicknesses from 1-1/4 inches to 2 inches. Installation is typically handled by a finish carpenter, general contractor, or experienced trim installer.

This passage set is intended for residential interior doors where a latch is needed but a lock is not. Typical applications include hallway doors, pantry doors, bedroom closets, and similar non-secure interior openings. The modern rectangular rose provides a low-profile mounting plate that suits doors with flat or milled-panel profiles. The satin nickel finish coordinates with brushed metal fixtures common in contemporary and transitional design schemes. The 2-3/8 inch backset is the standard measurement for most residential interior pre-hung doors.

Key Features

• Passage function — free rotation, no locking mechanism
• Round knob profile paired with modern rectangular rose
• Satin nickel finish for a brushed, low-sheen appearance
• 2-3/8 inch backset fits standard residential interior door prep
• Compatible with door thicknesses from 1-1/4 inches to 2 inches
• Sold as a single set (each)

Compatibility

Designed as an OEM-style passage set for interior residential doors with a standard 2-3/8 inch backset and a door thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is performed by a finish carpenter or skilled trim installer using standard door hardware tools including a hole saw, chisel, and screwdriver. Confirm door prep dimensions — bore hole diameter and backset — before installation. Do not force the latch into an undersized strike mortise; trim the mortise as needed for smooth latch travel. Verify door thickness falls within the 1-1/4 inch to 2 inch range before ordering.