Emtek 5112HLOUS10BLH Helios Lever Passage Set Oil Rubbed Bronze

Product Description

The EMTEK 5112HLOUS10BLH is a left-hand Helios lever passage set finished in Oil Rubbed Bronze, designed for interior doors that do not require locking. It ships with a 2-3/8 inch backset and pairs with a Modern Rectangular Rose. The set accommodates doors ranging from 1-1/4 inches to 2 inches thick, covering most standard residential and light commercial interior door applications. A licensed carpenter, finish contractor, or skilled tradesperson typically handles installation. The Oil Rubbed Bronze finish provides a dark, hand-applied appearance suited to transitional and contemporary design schemes.

This passage set is intended for interior non-locking applications such as hallways, closets, and living spaces where a latch is needed but a lock is not. The Helios lever profile features a straight, angular geometry that complements modern and transitional interiors. The Modern Rectangular Rose keeps the wall plate low-profile and consistent with the lever's geometry. At 3.2 pounds, the hardware set is solid in hand. It is sold as a single assembly (EA) and fits doors in the 1-1/4 inch to 2 inch thickness range with a 2-3/8 inch backset.

Key Features

• Left-hand orientation for correct lever return on left-hand doors
• 2-3/8 inch backset fits standard interior door prep
• Compatible with door thicknesses from 1-1/4 inches to 2 inches
• Modern Rectangular Rose keeps trim low-profile and geometric
• Oil Rubbed Bronze finish suits transitional and contemporary interiors
• Passage function — latch only, no lock cylinder

Compatibility

Designed as a passage set replacement or new-installation fit for interior doors with a standard 2-3/8 inch backset and a thickness between 1-1/4 inches and 2 inches.

Installation Notes

Installation is typically performed by a finish carpenter or door hardware installer. Before beginning, confirm door hand orientation to ensure the lever return operates correctly. A standard door prep with a 2-1/8 inch bore hole and 1 inch cross-bore is required for most passage set installations. Do not force the rose or lever onto the spindle — follow the manufacturer assembly sequence to avoid finish damage on the Oil Rubbed Bronze surface.

WARNING: This product can expose you to chemicals including lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.